What is the requirement to make client server network?

Your server ping all client of your network but your client can not access or pin server so how you can troubleshoot this problem?

Check to make sure your firewall is not blocking ping ICMP requests on the server. Also, check to see if the clients can ping each other and the default gateway for starters.

If you are going to open an Internet cafe should you use peer to peer networking or a client server network?

A client server is better because you can set limitations such as blocking access to system files, and etc. Also it is easier to make internet filters for that one type of client they are set as so they are not doing anything they shouldn't be doing.

Why must the server program be executed before the client program?

A server program must be executed before the client program because once a client is run, it will attempt to initiate a connection with the server. If the server is down, then the client will not be able to make a connection.

How can you configure a Win XP client workstation and Win 2000 Advance Server to make the network robust or fast?

The first thing to ensure that you are running the NIC on the client at Full Duplex and also ensure that the switch that you are using to connect to the server is running a Gibabit NOC and running 1000SX and not running 100TXUsing your scenario of one server and one computerServer - At least two Gigabit network cards. Team the network cards up so that they act as one.Network - A managed Gigabit switch. Use port aggregation where the server network cards are connected.XP workstation - Gigabit network card.

What is the role of server in client server architecture?

what is client server architecture? what is client server architecture? what is client server architecture? what is client server architecture? what is client server architecture? what is client server architecture? what is client server architecture? what is client server architecture? what is client server architecture?

What are the models of computer network?

How to Configure a NetworkIn this section you will learn how to configure a network, peer to peer, client server, workstation, server, basic data communication.Peer to Peer network modelBefore configuring a computer network, you have to decide that, which networking model you require. There are two main types of network models. Peer to peer and client-server network model. In the peer to peer network model you simply use the same Workgroup for all the computers and a unique name for each computer.Additionally, you will have to give a unique IP address of the same class A, B, or C for all the computers in your network and its related subnet mask e.g if you decide to use class A IP address for your three computers in your Peer to Peer network then your IP address/Subnet mask settings can be as follows.Computer Name IP Address Subnet Mask WorkgroupPC1 100.100.100.1 255.0.0.0 OfficenetworkPC2 100.100.100.2 255.0.0.0 OfficenetworkPC3 100.100.100.3 255.0.0.0 Officenetworgoogle_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad);Please note that the above example is for only illustration purpose so you can choose any IP address, computer name and workgroup name of your interest.For doing this right click on My Computer and then click Properties then go to the Network Identification section and set these.In a peer to peer network all computers acts as a client because there is not centralized server. Peer to peer network is used where not security is required in the network.If a computer fails to work then all other computers work normally in peer to peer network.Client/Server Network ModelIn the client/server network model a computer plays a centralized role and is known as a server all other computers in the network are known as clients. All client computers access the server simultaneously for files, database, docs, spreadsheets, web pages and resources like hard diver, printer, fax modem, CD/DVD ROM and others. In other words, all the client computes depends on the server and if server fails to respond or crash then networking/communication between the server and the client computes stops.If you want to configure a client-server network model then first prepare the server. Install Windows 2000 or Windows 2003 Server from the CD on the server computer and make a domain. You can create a domain by this command on the Run "DCPROMO". You can give this command once you install the server successfully. After you give the DCPROMO command you will be asked for a unique domain name. All the client computers will use the same unique domain name for becoming the part of this domain. This command will install the active directory on the server, DNS and other required things. A step by step wizard will run and will guide you for the rest of the steps. Make sure that a network cable is plugged in the LAN card of the server when you run the DCPROMO.exe command.When the Active directory is properly installed on the server, restart the server. You can create network users on the server computer and also name/label the network resources like computers/printers etc.Once you install the server successfully now come to the client computers. Install Windows 2000 professional on your all client computers. Once you install the Windows 2000 professional on the clients the next step is to make this computer (client computer) a part of the network.Configuration Steps1. Choose a unique name for each client computer2. Choose unique IP address for each computer and relevant.3. Use the same domain name for all client PCs.Network/System administrators are required to do these administrative tasks on the server and client computers. Any shared resources on the network either on the server or the clients can be access through the My Network Places in the Windows 2000 platform. There is another way to connect to the shared resources by giving this command in the run \\ComputerName\SharedDriveLetter.Network configurations steps can be implemented by right clicking the My Computer>Properties>For giving the IP address you will have to right click on the My Network places>properties>Local Area Connection>Properties>Internet Protocols (TCP/IP)>Properties and then give the IP address and subnet mask of the same range and class for all the computers in the network.

How do you make a client for a runescape private server and have it able to let other people download and play when i already have the server ready but need to make it into a client?

Use the moparscape forums for guides on that.

Can you make a cracked mineceaft server?

Not unless you have a minecraft client in beta.

What Are The Most Appropriate Network Operating Systems for client-server and peer-to-peer networks?

The question does not fully make sense , but as far as I understood - any unix based OS is good for you.

What is client-server?

The computer requesting information is called a CLIENT. The computer responding to the request is called a SERVER. Data transfer from a client to as server is reffered to as an upload. EX. When you want to enter the game. Ur the client waiting for the server to get you in Data transfer from a server to a client is reffered to as a download. EX. When you download stuff from Limewire or Utorrent. Your the server waiting for the client to give you the song or movie.

How do you make a rs2 client?

I belive you are talking about a runescape private server? if so you can go to http://www.moparscape.org/smf and click 'Server Downloads' and then it will have a list of clients and sources. Whats the difference between a client and source? [Client] - You use a client to connect to the source/server, without a client you cannot play the private server/game. [Source/Server] - This is the actual game, this is what you run the server off, and this supplies all of the characters info, and also other things you would like to change. I hope this helps you out, goodluck.

Does anyone have a more creeps and weirdos server for minecraft?

Well There is no actual minecraft server client to make morecreeps & weirdos online