0
What else can I help you with?
What is half duplex 10 100 switch?
Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).
What is 6G mobile technology?
As clear form the name, 6G is recently announced new data transfer technology having a bandwidth of about 100 GBPS. It will make data transfer really faster and the tranfer rate will go beyond 100 MBPS.
What is the transmission rate of Ethernet lans?
Ethernet LANs have transmission rates of 10 Mbps, 100 Mbps, 1 Gbps and 10 Gbps For an X Mbps Ethernet (where X = 10, 100, 1,000 or 10,000), a user can continuously transmit at the rate X Mbps if that user is the only person sending data. If there are more than one active user, then each user cannot continuously transmit at X Mbps.
LAN protocol using bus or star technology and supporting data transfer from 10 to 100 mbps is?
ethernet
Is 100 mbps up and 25 mbps down good for xbox online gaming?
no 25 mbps is up not 100
Which is faster 10.0 Mbps or 100 Mbps?
It's not that much faster -- maybe a little over twice as fast. DSL gives you 1,500 Mbps and cable can go as high as 8,000 Mbps. ^ This is wrong (old answer) ^ First, 'b' is Bit, 'B' is Byte. There are 8 bits in a byte In the case of the question (Megabits per seconds): 100.0 Mbps is equivalent to 12.5 MBps (Megabytes per second). Dial up modems are (generally) capable of doing 0.056MBps (56Kbps) maximum, 100.0 Mbps (12500Kb/s) is ALOT faster!
How many Mbps in a cat 5 cable?
Cat5e is 100 mbps.
How much time will be required to transmit 100 k bits of data over a 100 Mbps line?
appale
A widely-used LAN protocol using a bus or star technology and supporting data transfer from 10 to 100 mbps is called a?
Ethernet
How long should it take to transfer a 35 MB file from one computer to another over a Fast Ethernet network that supports data transfer rates of 100 Mbps?
21
How do you find the transfer time of 100 MB at 4 MBps?
1) Convert the 4 Mbps to MBps. (The transfer speed is specificed in mega-bits per second; 1 byte has 8 bits). That is, 4 Mbps / (8 bits/byte) = 0.5 MBps. 2) For file sizes, MB usually refer, not to a million bytes, but to 10242 bytes, so you may want to multiply the 100 MB by 1.0242. 3) Finally, divide the result the transfer speed (in BYTES per second!), to get the number of seconds. Depending on the result, you may want to convert this into minutes, hours, or even days. If you omit step 1 (confusing bits with bytes), you'll be off by a factor of 8; if you omit step 2, you'll only be about 5% off.
What transmission speed does 100-Mbps or Fast Ethernet support?
Ethernet supports speeds as low as 10 Mbps and as high as 1 Gbps. There are new initiatives to support 10 Gbps in the near future.
