0
What else can I help you with?
What command would the network administrator apply to a router that is running OSPF to advertise the entire range of addresses included in 172.16.0.0 19 in area 0?
**R1(config-router)# network 172.16.0.0 0.0.31.255 area 0
What is topology database in ospf?
In OSPF, a topology database is a data structure that each router maintains to store information about the network topology within an OSPF area. It includes details such as the network links, their costs, and the routers connected to those links. This database is used to calculate the best routes for routing packets through the network.
Does a Local Area network uses a router?
The highest MAC address among the active interfaces of the network will be used. There will be no router ID until a loopback interface is configured. The highest IP address among the active FastEthernet interfaces that are running OSPF will be used. The highest IP address among the active interfaces will be used.
What are required when adding a network to the OSPF routing process configuration?
network address wildcard mask area ID
What is the difference between OSPF and IS-IS and which one is preferred?
OSPF requires an area 0, while IS-IS does not. Like OSPF, IS-IS uses areas when designing the network. However, IS-IS does not require and area 0 like OSPF does. Because IS-IS was originally designed for non-IP protocols, it can more easily support IPv6 routing. Preference is relative to the size of the network. OSPF (a network layer protocol) is more often used in medium to large enterprise networks because of it's special tunnelling features. IS-IS is often used in VERY large ISP networks because of its stability features and the fact that it can support more routers.
Two routers need to be configured within a single ospf area which two components need to be configured on both the routers to achieve this?
Two routers need to be configured within a single OSPF area. Which two components need to be configured on both routers to achieve this?
What is backbone area in OSPF?
In OSPF (Open Shortest Path First), the backbone area is designated as Area 0. It serves as the central hub for routing information exchange between other OSPF areas, ensuring efficient communication and route distribution. All other areas must connect to the backbone area, facilitating the proper functioning of OSPF and maintaining a hierarchical network structure. If an area cannot connect directly to Area 0, it is required to use virtual links to establish that connectivity.
How do you share your network with a router?
i get my network from a cable of the server which is mean (Local Area Connection)
What device connects a computer to a local area network?
A router
What is wan in a router?
WAN Stands for "Wide Area Network", and is the terminology used to describe networking on a geographical scale.
Where does router obtain signals?
the signal obtain from wide area network
Whose small single network?
Local Area Network is the smallest single network.
