The wire and sensor hanging in front of a condenser typically serve as part of a temperature or pressure sensing system. The sensor monitors the conditions within the condenser to ensure optimal performance and efficiency, helping to prevent overheating or other issues. This setup allows for real-time data collection and feedback to the system's control mechanisms, enhancing operational reliability and safety.
you don't need one. when you open ur hood the first thing u see is alternator. the map sensor is right in between the alt. and condenser on the intake manifold
Do you mean the ambient (outside) temperature sensor? It is usually located between the grill and the radiator, near the middle and at the bottom of the radiator.
The ignition failure sensor in an 01 Stratus RT is located above the condenser. It is near the ignition coil. ?æ
The engine computer uses the coolant temperature sensor and the air conditioning pressure transducer to decide when to operate the radiator fan. The coolant temperature sensor is located near the thermostat housing on top of the engine. The ac transducer is on the line between the compressor and condenser.The engine computer uses the coolant temperature sensor and the air conditioning pressure transducer to decide when to operate the radiator fan. The coolant temperature sensor is located near the thermostat housing on top of the engine. The ac transducer is on the line between the compressor and condenser.
the speed sensor is located on the transfer case in the middle of the vehicle
Drivers side behind the grill under the plastic guard at the top of the ac condenser.
Usually on the driver side cylinder head. Between the front exhaust port and middle set.
The ambient temperature sensor in my 94 GS300 is located between the back side of the bumper and the condenser unit/radiator. It's about the size of a AA battery. That may be the best place to look.
It is behind the front bumper fascia, clipped on the bottom of the ac condenser.
This sensor is located about middle of the radiator grill side.
Attached to the middle of the engine block right underneath the lower intake plenum, roughly half way between the heads.
When choosing a condenser tumble dryer, key features to consider include capacity, energy efficiency, drying programs, noise level, and additional features like sensor drying and anti-crease functions.