Monitors, Keyboards, and mice all need a signal from the computer to work properly. Have you have the computer checked by a Certified Technician lately
If you keyboard is unable to pick up its signal, trying unplugging it off and replugging it.
Check the cable running from your monitor to your computer. It could be disconnected, loose, or be a bad cable. If you decide it is not the cable then it could either be a bad monitor or a bad graphics card.
There might be a problem with the cable between the computer and the monitor, or with the graphics card inside the computer. Check that the cable is plugged in between the computer and the monitor. cable,monitor and graphics card all work but I still can't get the monitor to work no signal could the processor cause this problem
Check your cord from the computer and monitor. If that is ok check your video card.
A computer monitor splitter cable is used to send video signal from one monitor to a second monitor. This may be helpful when making presentations to meetings or for demonstrations in classrooms.
The monitor is not powered by the computer. If there is not Signal to the monitor from the computer there will be no display, however the power to a monitor is supplied by a separate cord from the outlet to the monitor.
It means that the monitor can't detect a signal from the computer. There are a number of things that might cause that: * If the monitor has more than one input, then the wrong one might be selected - nowadays, most monitors automatically switch to the "active" input, so this is less likely. * The monitor's signal cable might not be plugged in. * The computer is turned off. * The computer's video card is faulty. * The computer's video card is disabled. * The signal cable is faulty. * The monitor is faulty.
First, there will be no limit on the simultaneous key presses (6 on USB). And when you use USB the computer is using CPU time polling your keyboard, with PS2 the keyboard isn't polled at all, the keyboard sends a signal straight to the computer each time you press a key.
First, there will be no limit on the simultaneous key presses (6 on USB). And when you use USB the computer is using CPU time polling your keyboard, with PS2 the keyboard isn't polled at all, the keyboard sends a signal straight to the computer each time you press a key.
A bluescreen is typically the state of the TV/Monitor in the on state but in which no signal is being transmitted to the screen.
It means it uses "Infrared" light instead of a "wireless" radio signal to connect to the computer.
This is actually coming from your monitor. I am assuming you cannot get a picture on your screen. It is telling you it cannot detect any input signal. You just need to check where the monitor cable is plugged in and ensure its in the right spot.