I used opening the top cap and rinse many times the sponges. But you must to take off the sponges carefully using a needle. After washing dry them by pressing with an absorbing paper. Close the cartridge again and seal it with
a glue. Afterwards insert the ink in the proper holes.
refill ink cartridge lexmark z2320? that is very simple. followed this step for to refill the ink cartridge: open the cap of ink cartridge. tojrus the cap and cur ink to cartridge. closed the cap such as originally cartridge. save at room temperature for two hours. Now, the ink cartridge can be used. good luck for you.
A dual-bay ink jet printer is designed to not print unless both bays have cartridges inserted. If you aren't printing color documents, you can leave an empty color cartridge in the color ink bay and the printer will work because all printing (even color) includes the B&W cartridge.
for safety. so that even if they think theyre not and pretend its empty it wont shoot. never shoot someone thinkning tis empty cause you may be wrong
Because you throw it already
Blood
what should i do?
a scuba tank is very thick, and so it wont be used if empty the valve remains to be closed, not allowing any air to excape, disallowing to be crushed. if the air cant leave the tank it wont crush.
IF the bolt is properly installed, are you trying to close the bolt on a cartridge? The Mauser is designed to feed from the magazine- if you single load a cartridge, the extractor may not fit over the rim.
it is broken
Obviously if it will not start, there IS something wrong with it.
Wrong thermostat? Wrong installation procedure?
you need to refill it and also need to check the oil