answersLogoWhite

0

192.168.14.100

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What is the subnet mask number to this IP address number 86.158.175.121?

Subnet mask for the above is 255.0.0.0


What is the result when changing from a subnet mask of 255.255.224.0 to a subnet mask of 255.255.240.0?

By changing subnet mask..from 255.255.224.0 to 255.255.240.0 Number of subnetworks increase and the number of host in each subnetwork decreases


What is the difference between the subnet mask for a Class A address with 16 bits for the subnet ID and a class B address with 8 bits for the subnet ID?

In a Class A address, the default subnet mask is 255.0.0.0, allowing for a large number of hosts within a single network, but with 16 bits designated for the subnet ID, the subnet mask becomes 255.255.0.0. In contrast, a Class B address has a default subnet mask of 255.255.0.0, and with 8 bits for the subnet ID, the subnet mask would typically be 255.255.255.0. Thus, the key difference lies in the number of bits allocated for the subnet ID and the resulting subnet masks, affecting the number of available subnets and hosts per subnet.


What is a subnet mass number?

There is no technical term called "subnet mass number." It might be a misconstrued term. Subnetting is dividing a network into smaller subnetworks for better organization and security. Mass number is used in chemistry to denote the total number of protons and neutrons in an atom's nucleus.


What class has subnet mask 255.255.255.0?

The address you gave is not an IP address; it has the appearance of a subnet mask. It could be a class A or class B subnet mask.


Does ipv6 require a subnet mask?

It does not require a subnet mask.


What class has subnet mask 225.225.225.0?

If this is a default subnet mask, then it would be a class C subnet mask. If you are subnetting a network and this is not the default subnet mask, then it could be either a class A or class B.


Defference bw a default subnet mask and a custom subnet mask?

The default subnet mask has a standard size. The custom subnet mask allows you to make subnets that are smaller or larger than the default.


What enables an system to determine which part of an ip address represents the host and which part represents the network?

The subnet mask. The subnet mask consists of a certain number of ones, followed by a certain number of zeroes (in binary). The ones tell you how many bits in an IP address make up the network part; the zeroes are for the host.The subnet mask. The subnet mask consists of a certain number of ones, followed by a certain number of zeroes (in binary). The ones tell you how many bits in an IP address make up the network part; the zeroes are for the host.The subnet mask. The subnet mask consists of a certain number of ones, followed by a certain number of zeroes (in binary). The ones tell you how many bits in an IP address make up the network part; the zeroes are for the host.The subnet mask. The subnet mask consists of a certain number of ones, followed by a certain number of zeroes (in binary). The ones tell you how many bits in an IP address make up the network part; the zeroes are for the host.


What is the subnet mask if the ip address is 150.1.1.0?

The subnet mask for the IP address 150.1.1.0 depends on the specific subnetting scheme in use. However, if we consider it as a default Class B address, the default subnet mask would be 255.255.0.0. If subnetting is applied, the mask could vary based on the number of subnet bits used. For example, if it's subnetted into smaller segments, it could be 255.255.255.0 (for a /24 subnet).


How can you change from a subnet mask of 255.255.224.0 to a subnet mask of 255.255.240.0?

2 given subnets


What is the subnet mask of IP address 188.88.0.0?

255.255.255.0