You would use a network cable to connect a computer to a network. The type of cable and its electrical, possibly optical, and mechanical attributes depend on the network's pysical layer.
Networks use a variety of fiber optic cables, coaxial cables, single twisted-pairs, double and quadruple twisted-pair cables. Other forms exist, including those not requireing a dedicated cable (such as some devices designed for networking over power line), or not requireing a cable at all (such as devices designed for networking over radio frequency connections).
Well, You need a data cable to connect to a network. The data cable would go from your network adapter on your computer to the network. The network might be centralized by a switch, router, hub, or even a simple access point via WIFI. If WIFI is the case, then your network adapter on your computer would have to be a wireless one. Please improve or correct.
Generally, if we are speaking of the same kind of "network cable" and there is not a component to the question which I am misunderstanding, an adapter is not necessary to simply plug a computer into a network. There is typically a dedicated port for this on the computer itself.
A network interface card or NIC.
Console Cable
Depends on the way you want to connect them. Most probably you want to connect them using network interfaces. In that case you have to use cross-over cable. Straight cable, the sort you would use to connect your computer to a wall network socket, will not work.
A crossover cable.
You need some kind of network connection. It may be a wireless, or a traditional network cable.You need some kind of network connection. It may be a wireless, or a traditional network cable.You need some kind of network connection. It may be a wireless, or a traditional network cable.You need some kind of network connection. It may be a wireless, or a traditional network cable.
A network interface card (NIC) would allow that.
Only two computers, can be connected to a crossover cable, although three can be supported as well, if one has two or more Network Cards (NIC Cards) installed in one workstation. this kind of Network is Known as Peer-to-Peer.
Yes.Well, unless you want to have separate cables and network cards to connect each computer to every other computer, you need some kind of central network equipment. Common options include a hub, and a switch.Yes.Well, unless you want to have separate cables and network cards to connect each computer to every other computer, you need some kind of central network equipment. Common options include a hub, and a switch.Yes.Well, unless you want to have separate cables and network cards to connect each computer to every other computer, you need some kind of central network equipment. Common options include a hub, and a switch.Yes.Well, unless you want to have separate cables and network cards to connect each computer to every other computer, you need some kind of central network equipment. Common options include a hub, and a switch.
It is known as across-over cable.
None. You need a network card and cable to connect them. The cable is called CAT 5.
A cable wire that looks like a Y is needed to connect a laptop to a stereo. This cable allows you to use the single output jack on the laptop to connect to the left and right inputs on the stereo.
If you plan on creating a computer to computer network, UTP cable is the best. Otherwhise i would recommend a router so that you may also share your internet connection.
You can not connect a DSL modem/Router to a Cable modem the are two completely different devices. Basically one speaks English the other speaks Mandarin and neither has Rosetta Stone.
Rogers offers digital cable to its subscribers. This network is available at home, with a standard cable box or DVR/PVR, or you may subscribe for a service for your computer, and mobile devices.