0
The power connector that provides power to a floppy disk drive (FDD) is typically a 4-pin Molex connector. This connector supplies both 5V and 12V power to the drive, with the 5V line powering the electronics of the FDD and the 12V line used for the motor that spins the floppy disk. In some modern systems, especially those using SATA, a SATA power connector may also be used with appropriate adapters.
What else can I help you with?
Is power supply a component of CPU?
CPUs get power from two places-- From the motherboard through the tiny pins on the bottom of the CPU (Which in turn gets power from the 20 / 24 pin connector that connects tot he power supply) and from a 4 / 8 (Only on the newest boards) - pin connector that directly feeds the CPU a very steady supply of power. Both come from your actual Power Supply.
What lcd component is responsible for providing the right kind of power to the backlight?
power supply
What device uses the 12v 6- pin power connector?
A lot of hard disk docking stations use these kind of power supplies.
How is a three phase agricultural motor used when there is no power supply?
With no three phase power supply you can't use a three phase motor of any kind at all!
What kind of power supply is needed for a wireless mic?
The power supply that is needed for a wireless microphone would be a rechargeable battery. Batteries such as these could be purchased at Amazon or Full Compass.
If 1.8 amps ac is being drawn from a 24 volt DC power supply what would the current draw be in DC amps?
A 24 volt DC power supply provides DC amps, not AC amps. You cannot draw 1.8 amps AC from a DC power supply, without some kind of inverter stage.That is the answer to the specific wording of the question. Now the answer to the question I think was originally intended...If 1.8 amps AC is being supplied to a 24 volt DC power supply, what would the current supplied by the power supply be?Power is volts times amps, so power supplied to the power supply is 120 VAC (assumed) times 1.8 amps, or 216 watts. If the power supply is 100% efficient, then the power input equals the power output, so use the some equation to take 216 watts and divide by 24 volts, and you get 9 amps.Keep in mind, this is ideal state, assuming 100% efficiency, and no real power supply will be that.
A toslink is what kind of cable?
A toslink cable has a round connector that provides digital audio data using small pulses of light instead of electricity. It is manufactured by Toshiba.
Where is the power supply on an oven?
The power supply for an oven is typically located at the back of the appliance. It is usually connected to a dedicated outlet or circuit in the kitchen. It is important to ensure that the power supply is properly connected and grounded for safe operation of the oven.
What kind of power supply do you need for pyramat pm 220?
20v for laptop works fine
What kind of wattage does a Dell Professional Series power supply use?
There is a 750 watt power supply and an 850 watt power supply. Both have gotten excellent customer ratings at various websites. I would check the specification compliance and voltage/frequency requirements that came with your device.
How many watts should you look for in a power supply for desktop?
You need to know what kind of voltage all your computer parts work at. There's not really a general Watt power supply that you should look for.
What kind of connector does a Ethernet cable use?
The UTP cable it uses an RJ-45 connector. For coaxial cable, it will be either an F connector or a BNC connector.
