answersLogoWhite

0

Use ip\mac scanner: http://trogonsoftware/trogon-mac-scanner.html

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Does the source link-layer address define the network?

No, the source link-layer address does not define the network; it identifies the specific device within a local network. Link-layer addresses, such as MAC addresses, are used for communication within the same local area network (LAN) and are not routable across different networks. The network itself is typically defined by its IP address range or subnet, which facilitates routing between different networks.


Will ping work if the default gateway is down?

Yes, it will but only within local network.


Why is it unlikely that you will find the ip address 192.68.250.10 on the internet?

The IP 192.68.250.10 is a local IP address for use within a wifi or ethernet network. An example of a public IP is '175.176.252.8'


Do you share your IP address with other internet users in your house who use the same wireless internet 'network' as you?

Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.


What criterion must be followed in the design of an IPv4 addressing scheme for end devices?

Each IP address must be unique within the local network.


What is an example of APIPA?

An example of APIPA (Automatic Private IP Addressing) is when a device is unable to obtain an IP address from a DHCP server, so it assigns itself a link-local IP address in the range of 169.254.0.1 to 169.254.255.254 to allow for local network communication. This temporary address helps devices communicate within the same network segment until a proper IP address can be assigned.


What is the only type of IPv6 address required to communicate with other computers on a local network?

The IPv6 address that is required for other computers on a local network to communicate with each other is, the "Link-local address". The first hextet will always begin with FE80.


What is 169.255.255.0?

The IP address 169.255.255.0 is part of the larger address block designated for link-local addresses in the Internet Protocol version 4 (IPv4). This specific address is technically reserved and is not typically assigned to hosts on a network. Instead, link-local addresses are used for communication within a local network segment. In practice, addresses in the 169.254.0.0/16 range are automatically assigned to devices when they cannot obtain an IP address from a DHCP server.


How do you bridge the same IP address between Windows as host OS and Linux as guest OS in VMWare?

You need to connect VMs to internal NAT (should be configured with physical adapter to access physical network). While within NAT VMs are going to have different IP addresses, within physical network (your local network) its IP address is going to be the same.


When a host on network A sends a message to a host on network B which address does the router look at?

When a host on network A sends a message to a host on network B, the router looks at the destination IP address in the packet’s header to determine where to forward the message. This IP address is used to identify the specific network and host within that network. The router uses its routing table to decide the best path for the packet based on this destination IP address. The MAC address is not used for routing between different networks, as it only applies to the local network segment.


The IP address 127.0.0.1 is called the address?

This IP address is usually called the localhost address.


What is responsible for discovering the internet address of a host on the local network?

RARP