0
What else can I help you with?
How do you format an external hard drive to FAT32 using Windows XP?
Drives under 32 GB can be formatted as FAT32 using the Disk Management tool (enter compmgmt.msc into the Run prompt and select "Disk Management from the list when the program pops up). For drives over 32 GB, you will have to use a third-party tool, such as GPartEd, since Windows XP does not allow you to create a FAT32 file system over 32 GB.
A technician is attempting to create multiple partitions on a hard disk This will allow for storing the operating system and data files on separate partitions What is the maximum number of primary p?
A technician is attempting to create multiple partitions on a hard disk. This will allow for storing the operating system and data files on separate partitions. What is the maximum number of primary partitions per hard drive that is supported by Windows XP?
Which Windows tool is used for restoring registries manually and for rebuilding partitions?
In computing, the recovery console is used for restoring registries manually and for rebuilding partitions. It uses a command line interface to allow the performance of certain limited functions when Windows is unable to boot normally.
What is the largest FAT partition allowed by windows xp?
15641894189 kibbles"Your so stupid32 GB"You're only partly right and can't spell.32GB is the largest FAT32 partition Windows XP will create. However, Windows XP works fine with FAT32 partitions up to 2TB (2000 GB) The easy answer is to create the partition with Windows 98 or something like Parted Magic. Useful information for the large capacity portable hard drives available now. Formatting those to NTFS can be a permissions nightmare on multiple PCs and multiple accounts.
Why does desktop use reset bottom to open windows?
A computer filing system is how your computer manages the information that is stored on its hard drive. The most common Windows filing systems are the FAT16, FAT32 and the NTFS filing systems. The FAT32 is the universally standard system because can be used by more versions of Windows than the others.FAT32 filing system is the system used on older Microsoft Windows systems including Windows 95, Windows 98 and Windows Me. The name FAT32 describes how data is stored on the hard drive, in 32 bit chunks. A FAT32 filing system can be installed,but is not recommended, on Windows 2000, Windows XP and Windows 2003. The FAT 32 filing system is superior to the older FAT16 system in that it supports disk partitions as large as two terabytes (2,048 gigabytes), whereas FAT16 only supports two gigabytes. However, FAT 32 also has limitations. The FAT32 system does not allow diskcompression using DriveSpace, it is not compatible with older disk management software and it runs a bit slower that FAT 16.While the Windows XP, 2000 and 2003 can support the FAT32 system, it is recommended they run an NTFS (new technology file system) because it is a can handle more functions that the FAT32, including the capacity to support Unicode file names, proper security, compression and encryption. The NTFS system is supported by the windows nt, 2000, XP and Vista and 7, and is able to handle much more memory than either the FAT16 or FAT32 systems. The NTFS also allows computers to more efficiently use the space available to store information on their hard drive, provides a better system of cataloging files on your hard drive for better and faster retrieval, and provides better methods for executing basic file operations such as delete, copy and rename.Read more: What_is_the_difference_between_NTFS_and_FAT32
How do you make inbound and outbound rules on windows xp firewall?
Windows Advanced Firewall, turn on outbound blocking and logging ------------------------------------------------------------------------------------------ Control Panel/Administrative Tools/Windows Firewall with Advanced Security /"Windows Firewall Properties" link - Change all Profiles, Outbound connection = Block - Public Profile tab/Logging/Customize -- Size Limit = 999999 KB -- Log Dropped packets = Yes Comment: Windows 7 Firewall has outbound blocking, but most people don't know that you have to turn it on. When outbound blocking is turned on, it only allows the programs and services you specify to talk to the net. Malware will have a hard time reporting back to their servers. However, it is missing a feature that tells you what it has blocked outbound. So after installing a program that needs to connect to the net, like your antivirus program, you have test those exe files one by one to see which is responsible for talking. ----- Firewall Rules ------ HowTo allow a windows service outbound: Click on Outbound Rules on the left, click on 'New Rule', select 'Custom', next to 'Services' click customize, select 'Apply to this service', scroll and find 'Windows Update', next, ports and protocol - (no change), next, IP addresses ( no change ), next, select 'Allow The Connection'. Checkmark all 3 "Domain", "Private" and "Public". Give the rule a name, eg "Allow service X". HowTo Allow a program outbound: Click on Outbound Rules on the left, click on 'New Rule', Select "Program", next, select "This program Path" and click on "Browse" button, Navigate to program folder and select the EXE, next, select "Allow the connection", Checkmark all 3 "Domain", "Private" and "Public". Give the rule a name, eg "Allow Program X". Outbound/ allow service 'Windows update' Outbound/ allow service 'Windows Time' Outbound/ allow program '\Program files\Windows Media Player\wmplayer.exe' ( Program, This program path, allow the connection ) Outbound/ allow program '\Windows\HelpPane.exe' (Windows Help, fetch more online help ) Outbound/ allow program \Windows\system32\slui.exe (windows activation ) outbound/ allow program <path to Live Messenger> Outbound/ allow program '\windows\ehome\ehshell.exe' (Windows Media Centre) Outbound/ allow program <Mcafee Site Advisor dir>\mcsacore.exe (if you use Mcafee Site Advisor) Outbound/ allow program '\program files\windows defender\msacui.exe' Outbound/ allow program <Firefox/Chrome/Opera, whichever browser you use> Outbound/ allow program \program files\Internet explorer\iexplore.exe Outbound/ allow program '\program files\Secunia\PSI\psia.exe' ( if you are not using Secunia PSI, you should ) Outbound/ allow program '\program files\Secunia\PSI\psi.exe' Inbound/ allow program <Mcafee Site Advisor dir>siteadv.exe Inbound/ allow service 'SA Service' ( Mcafee site advisor )
What is the difference between NTFS and FAT32?
A computer filing system is how your computer manages the information that is stored on its hard drive. The most common Windows filing systems are the FAT16, FAT32 and the NTFS filing systems. The FAT32 is the universally standard system because can be used by more versions of Windows than the others. FAT32 filing system is the system used on older Microsoft Windows systems including Windows 95, Windows 98 and Windows Me. The name FAT32 describes how data is stored on the hard drive, in 32 bit chunks. A FAT32 filing system can be installed, but is not recommended, on Windows 2000, Windows XP and Windows 2003. The FAT 32 filing system is superior to the older FAT16 system in that it supports disk partitions as large as two terabytes (2,048 gigabytes), whereas FAT16 only supports two gigabytes. However, FAT 32 also has limitations. The FAT32 system does not allow disk compression using DriveSpace, it is not compatible with older disk management software and it runs a bit slower that FAT 16. While the Windows XP, 2000 and 2003 can support the FAT32 system, it is recommended they run an NTFS (new technology file system) because it is a can handle more functions that the FAT32, including the capacity to support Unicode file names, proper security, compression and encryption. The NTFS system is supported by the windows nt, 2000, XP and Vista and 7, and is able to handle much more memory than either the FAT16 or FAT32 systems. The NTFS also allows computers to more efficiently use the space available to store information on their hard drive, provides a better system of cataloging files on your hard drive for better and faster retrieval, and provides better methods for executing basic file operations such as delete, copy and rename.
What file systems allow folders to be shared?
NTFS FAT FAT32
How do you run windows program on ubuntu?
Download a program called Wine. It will allow you to run almost all .exes you download from the internet.
You want to set up a dual boot scenario between windows 98 and windows 2000?
If you have the hardware to support Windows 98 you can use Microsoft Virtual PC to install multiple Operating Systems that run on your current OS. Microsoft Virtual PC software is free; it is just a shell however that allows you install Operating Systems just as you would on a new hard drive, provided you have a valid OS on disk like Windows 98. You can download Virtual PC at Microsoft's official website. You may be asking how to install a dual boot system with Windows 98 and Windows 2000. If this is what you're trying to accomplish then you will need to know that you must install Windows 98 on its own Primary partition. Each operating system must be installed on its own partition. If you have a hard disk that has only a single partition, you have several options available. 1. You could reformat your current hard drive after backing up all your important files and re-install your operating systems and partition your hard drive into 2 Primary partitions. Windows will only allow a Primary partition to be made bootable; Windows will not allow Logical partitions of an Extended partition to be made bootable so you cannot install Windows on a Logical partition. An operating system like Linux will allow Logical partitions to be made bootable. -- Meaning you must create at least 2 Primary partitions to install a dual boot system with Windows. Also you can only create up to 4 Primary partitions on a single hard drive. Or you can create up to 3 Primary partitions and 1 Extended partition. Also you must know that the native files systems for Windows 98 and 2000 are not the same. Windows 98's native file system is FAT32 and Windows 2000 is NTFS. FAT32 cannot see an NTFS partition; however NTFS can read a FAT32 partition. The boot sector must be able to be read by both OS's. Which means the boot sector must be on a common file system between both OS's; FAT32 in this case. Installing Windows 98 first will install a FAT32 boot sector and will be able to be read by Windows 2000 after it is installed. This way the system will dual boot correctly. On another note DO NOT INSTALL Windows98 after Windows 2000 has already been installed. Your system will not dual boot correctly; you will overwrite the boot sector. Remember Windows 98 cannot see an NTFS partition, by default Windows 2000 creates an NTFS boot sector, since Windows 98 cannot see an NTFS partition it will overwrite the boot sector and your system will not dual boot correctly. Not all Windows versions can dual boot together. To see the supported dual boot configurations and more info on dual booting see related links. 2. Your other option; which is perhaps the best choice for what you are trying to accomplish is simply hook up another hard drive inside your PC case and you will be able to configure a dual boot system much easier and won't have to reformat your current hard drive. On a side note, you cannot use an external hard drive to boot to an Windows NT operating system, such as a Windows OS later than Windows 98. You will receive an error and the system will not boot! However, you can install an open source operating system such as Linux or Unix and have it boot to an external hard drive. Also Linux/Unix operating systems will even boot to a USB stick.
Do any PDAs run Windows Vista?
There is a downloadable program for your pda that will allow it to use vista.
What is the maximum hard drive size for Windows Millennium?
There are several barriers on hard drive size for Windows ME. As it relies on the BIOS for addressing, it suffers from the same limits on hard drive size as the BIOS. Here are the important ones: 127 GB barrier (hardware) - Most PCs of the era that Windows ME was released do not support more than 127 GB hard drives - the extra capacity will be unusable. 127 GB barrier (software) - Windows ME itself cannot address more than 127 GB natively. There are special patches that will allow it to address more. You will also need to use a third-party tool to partition the disk. 2 TB barrier (FAT32 implementation limit) - The FAT32 file system as used by Windows ME cannot be made larger than about 2 TB. However, you can divide the hard drive into partitions, so you should still be able to use disks larger than 2 TB. At this size, the limitations of the FAT32 file system really start to come into play, and defragmentation will take several hours.
