VLAN
Trunking
there are 2 available protocols used to encapsulate data traffic over a trunk link on a cisco switch 1. 802.1q is proprietary works only between 2 cisco switches 2. ISL is open standard works with any switch..
When you want to configure a switch and/or a router.
When you want to configure a switch and/or a router.
On a Mac, as on everything else, PPPoE is used to configure Point to Point Protocols over Ethernet which allows communication between computers connected on an Ethernet network.
The command used to display the commands that configure the routing protocol on a router is show running-config. This command provides a comprehensive view of the current configuration, including any routing protocols like OSPF, EIGRP, or BGP. To focus specifically on routing protocols, you can also use show ip protocols, which summarizes the active routing protocols and their settings.
You can configure addresses manually or configure the switch to learn the addresses dynamically. For more detailed information visit the Related Link.
How can I configure straight through cable?
all but IP routing protocols
A fabricated bend in trunking refers to a specially designed or custom-made bend in the trunking system used for routing cables or wires. These bends are created to accommodate specific installation requirements or to navigate around obstacles in the building structure. They are typically made by bending, welding, or shaping the trunking material to achieve the desired angle or configuration.
It is based on the (VoIP) protocol. SIP trunking can also be used in media service, to stream video or audio, especially audio. The VoIP or the SIP trunking is mainly utilized in the session of Voice over Internet Protocol, (VoIP). It is a medium of the use of telephone over the internet.
Identify the networktranspor layer protocols used for windows file sharing when the protocols are installed alone.