0
What else can I help you with?
What is the command to remove the console password router?
Remove Console password router>enable router#configure terminal router(config)#line console 0 router(config-line)#no login router(config-line)#no password router(config-line)#exit router(config)#exit
What is the effect of using th Router copy running-config startup-config command on the router?
This is an incomplete command. However, this indicates that the running configuration will be saved on the device to a different location.
What is the connection to a router's console port input called?
The connection to a router's console port input is commonly referred to as a "console connection." This connection is typically established using a serial cable, such as a rollover cable, connected to a terminal emulator program on a computer. The console port allows for direct access to the router's command-line interface for configuration and management purposes.
You want to replace the current running-config with the current startup-config and totally reinitialize the router . What command will you use?
You want to totally reinitialize the router and replace the current running-config with the current startup-config. What command will you use?
What command is used to find out the version the version of the ios running on a cisco router?
show?
What is the router command used to copy the running-configuration to NVRAM?
The router command used to copy the running configuration to NVRAM is copy running-config startup-config. This command saves the current active configuration so that it will be retained after a reboot. You can also use the shorthand version wr (short for "write memory") to achieve the same result.
Which components is affected by using the copy startup-config running-config command on a router?
NVRAM
What is the command for saving the router's running-configuration to non-volatile memory is?
copy run start
How do you save running configurations on router?
To save the running configuration on a router, you typically use the command copy running-config startup-config in the privileged EXEC mode. This command copies the current configuration stored in RAM (running-config) to NVRAM (startup-config), ensuring that the configuration is retained after a reboot. Alternatively, you can use the shorthand command write memory. Always confirm the save by checking the startup configuration with the show startup-config command.
How do you install ios on 2600 router?
To install IOS on a Cisco 2600 router, first, download the appropriate IOS image from Cisco's website (ensure you have the necessary permissions). Next, connect to the router via console cable and use a terminal emulator to access the command line. Transfer the IOS image to the router using TFTP or a similar method, then use the copy tftp flash command to copy the image to the router's flash memory. Finally, configure the router to boot from the new IOS image by updating the boot system command in the configuration and rebooting the router.
What command do you type to save the configuration stored in RAM to NV RAM?
Router(config)#Copy running-config startup-config
What command can you execute from user mode to display the current IOS version and feature set running on a router that your consoled into?
To display the current IOS version and feature set running on a router, you can execute the command show version from user mode. This command provides detailed information about the IOS version, the router's hardware, memory, and feature set. Alternatively, show version | include Version can be used to filter the output specifically for the IOS version.
