d
Computer management is when one has full control or organized method of controlling all the wires going into and coming out of a computer. This also means the wires are organized neatly.
Wires and a motherboard and a battery
The three factors are : Using wires of specifications that match the power requirements of motherboard . Use the fan or heat sink properly. Do not use faulty devices with mother board.
The common name is electronics or microelectronics. These resistors, diodes, capacitors, and integrated circuits (chips) are typically mounted on cards or a "motherboard."
Computer buses are the wires that send data around a computer. So, they are indeed components of a computer. However, in modern computers, the buses are a part of the motherboard. In older computer times, there were separate backplanes that everything else plugged into. So the name bus came from that period of time, and they were indeed separate components then.
because copper is a excellent conductor of electricity
A system of wires called the bus. Signals are sent through these wires from one component of the system, such as the CPU, to another part, say, the hard drive.
A power supply gives electrical power to all the components and parts of the computer. The power supply consists on several wires that connect to specific parts of the computer. Examples are the IDE/SATA CD/DVD Drive, IDE/SATA Hard Disk Drive, the motherboard, etc. Power supplies are only a computer part in a desktop computer, NOT a laptop computer.
To connect wires to the MS-6577 VER4.1 motherboard, you need to identify the specific connectors on the motherboard meant for the wires you want to connect, such as power switch, LEDs, USB headers, etc. Refer to the user manual or motherboard diagram to locate the appropriate connection points. Then, carefully align the wires with the corresponding pins on the connectors and gently push them into place to ensure a secure connection. Double-check the connections to ensure they are correctly aligned before powering on the system.
The wires and cables in a computer are often, collectively called "innards" or "guts."
Each wire carries a different voltage.