answersLogoWhite

0

PET : Thickness 12 mic X Pet Film density 1.4 = 16.80 GSMBOPP : Thickness 20 mic X BOPP Film Density 0.91 = 18.20 GSM

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What is the formula of gsm calculator of woven fabric?

easy formula for calculate gsm as below, GSM= (EPI/Warp count*1.1)+(PPI/Weft count*1.04)*23.5


What is the Fabric Construction formula?

What is the formula for calculation fabrics consumption. Which variables have in mind?


How do you calculate GLM of fabric?

width = 150 & gsm = 120 calculation : width x gsm/100 = glm 150 x 120/100 = 180


How many mil are in a gsm?

The conversion between mils and grams per square meter (gsm) depends on the material's density. A mil is equal to one-thousandth of an inch, while gsm measures the weight of fabric per area. To convert mils to gsm, you would typically need to know the specific weight of the material being measured. For example, for a common plastic film, one mil can roughly equal between 2.5 to 3.5 gsm, depending on its density.


Formula for gsm of paper?

GSM is a gram per square meter . tempate of 20x25cm paper size cut it and weight it in weightometer


25 micron=gsm,35 micron=gsm?

Micron (µm) and GSM (Grams per Square Meter) are units of measurement for thickness and weight, respectively. To convert microns to GSM, you would need information about the material's density. The formula for this conversion is: GSM = (Microns * Material Density) / 10.89 Without knowing the material's density, it's not possible to directly convert microns to GSM. So, you'd need to obtain the density of the material in question to make this conversion. The formula assumes that the density is in grams per cubic centimeter (g/cm³). Once you have the density of the material, you can plug it into the formula to convert any micron thickness to GSM.


How do you convert GSM of a paper into MM?

Paper comes in many different sizes, so there is no set conversion. However, GSM stands for grams / square meter, so if the GSM and density of the paper is known, conversion becomes easier. The formula for the thickness then becomes: Thickness = GSM/density.


Fabric gsm weight calculation?

GSM = grams per square meter Cut a 1 meter by 1 meter of fabric and weigh it in grams or weigh the fabric in grams (G) and measure the length in meters (L) and width in meters (W) and calculate: G/LW = grams per square meter = GSM


How do you calculate gsm of polyethylene?

To calculate the GSM (grams per square meter) of polyethylene, you need to know the weight in grams of a known area of the material. Measure a specific area of the polyethylene sample, weigh it in grams, and then divide the weight by the area measured to determine the GSM. The formula for calculating GSM is GSM = (Weight in grams / Area in square meters).


How do you calculate fabrics yards from gsm?

Easy formula for calculate gsm as below, GSM= (EPI/Warp count*1.1)+(PPI/Weft count*1.04)*23.5 Suppose: Fabric is 20x20/60x60 Calculate: (60/20x1.1)+(60/20x1.04)x23.5 =(3.3+3.12)x23.5=6.42x23.5=150.87 So, GSM is 150.87maximum Hopefully you get it. Thanks, Sharif, Merchandiser (Marketing), Sattar Textile Mills Ltd, Bangladesh. Cell: +8801611580380


What is Ne in formula of gsm of knitting fabric?

I would hazard that the "Ne" means "Needle/s"


How to calculate Rx level formula in GSM microwave antenna hop?

formulae for finding rx level