how do you pair it up
The sound of a doorbell is typically a short, distinctive chime or ringing noise to alert someone that there is someone at the door. The sound can vary depending on the type and model of the doorbell.
You don't give a model number. Most recent (last year or so) computers would have wireless abilities. You should be able to go to the manufacturer's website and look up the model number.
I have the AW21300W, which has 4 buttons:Light (Top left)Mode (Bottom Left)Start/Stop (Top Right)Lap/Reset (Bottom right)If you want the chime on, press button 4 and hold while you press button 2. When all the days show, the chime is on.
Although there are a number of sites that offer to help you acquire Linksys wireless router software, you might want to go directly to Cisco using this link: "http://homesupport.cisco.com/en-us/support/Linksys" and enter your model number. If you do not know your model number, there is support on the site to help you.
It depends on model of your router. Without knowing model we can't help you.
What is the value of a Howard Miller Grandfather Clock Serial Number 60280436, Model Number 610-305, Movement Number 354026F
To repair a Howard Miller Barwick Floor Clock Model 4882 that runs but won't chime, first ensure that the chime mechanism is properly engaged by checking the chime selector lever, which may be set to "silent." If the lever is correctly positioned, inspect the chime weights and the mechanism for any obstructions or misalignments. Additionally, check for any worn or damaged gears in the chime assembly that may need lubrication or replacement. If the issue persists, consulting the manufacturer's manual or a professional clock technician may be necessary.
The WRT54G just means that is the model number of router that you have. It's obviously created by Linksys, but different model numbers separate routers.
To turn on the alarm chime on a Brinks alarm system, first, access the main menu on your keypad by pressing the designated button (usually "Menu" or "Settings"). Navigate to the "Chime" or "Alarm" settings, and select the option to enable the chime feature. Confirm your selection, and exit the menu. If your model has a specific button for chime, pressing it should also activate the feature.
To cut off the door chime for the Dictograph G4100DLX, locate the chime switch on the unit. This is usually a small toggle or button that can be set to the "off" position. If the device has a volume control, you can also turn it down to mute the chime. For detailed instructions, refer to the user manual specific to your model.
To set the chime on a Cardinal watch, first locate the crown on the side of the watch. Pull the crown out to the second or third position, depending on your model. Rotate the crown to adjust the chime settings, usually indicated by a series of clicks or a digital display. Push the crown back in to save your settings and activate the chime.
All PS3 but the first 20 GB model are wireless. That means if you already have a wireless internet connection they can connect to it.