0
What else can I help you with?
What type of ACL can be used to force a use to authenticate to the router before acces a network?
Dynamic
What device handles access to another network for a client computer if it does not have a better option?
If a client computer does not have a better option for accessing another network, it typically uses a router to handle that access. The router connects the client to the appropriate network by forwarding data packets between the client and the destination network. In cases where a direct connection is not available, the router serves as a gateway, enabling communication over different network segments.
When hooking up Neatgear WPN824N Router can the modem provided by IP be bypassed and cable hooked into router direct?
Yes, you can connect the Netgear WPN824N router directly to your network cable, bypassing the modem provided by your ISP, as long as your ISP supports this configuration. However, most ISPs require a modem to authenticate your connection. If you choose to bypass the modem, you may need to consult your ISP to ensure that your router can connect to their network without issues.
What do you call the router on a network that serves as an exit from that network?
stub router.
Do you install a firewall before or after a router?
It depends on... If you want to protect your router and network install it before. If your router is safe and can handle intrusions install it after. Usually firewall comes first. Also it allows to control the traffic.
What is router bypassing?
Router is Bypassing to, system Network local Network and Internet or Network Regards NASEER
Is the ISP the same as the network for a computer?
Not usually. Typically "network" is referred to as being your home network. This includes any computers you have wired to a router or any wireless computers accessing your wireless access point (can be the same as your router) if you have one. The ISP is the company that provides you access to the internet. This is a typical setup where "network" is anything that is connected to the left of the modem. Computer -> DSL/Cable Modem -> ISP -> Internet
How do you configure RIP routing protocol on a Cisco router?
Here is a basic overview of the configuration of RIP on a Cisco router:Router(config)#router ripRouter(config-router)#network 192.168.1.0Router(config-router)#network 192.168.2.0Router(config-router)#network 192.168.3.0Router(config-router)#network 192.168.4.0Router(config-router)#network 192.168.5.0The 192.168.x.0 address can be changed to whatever address you would like to be broadcast over RIP. There are also other settings that can be configured.If you use RIPv2 you can also have the following configuration:Router(config)#router ripRouter(config-router)#version 2Router(config-router)#network 192.168.1.0Router(config-router)#network 192.168.2.0Router(config-router)#network 192.168.3.0Router(config-router)#network 192.168.4.0Router(config-router)#network 192.168.5.0Router(config-router)#exitRouter(config)#exitRouter#%SYS-5-CONFIG_I: Configured from console by consoleRouter#copy running-config startup-configDestination filename [startup-config]?Building configuration...[OK]Router#
How do network devices and transmit data?
Router
How do you get PSP network?
You can get network on your PSP by getting a network router.
Can I connect my network switch to my wireless router to expand my wired network?
Provided the manufacturers are compatible you can connect your network swithc to your router.
Can you set up playstation network without a router?
No because you need a router to connect to the playstation network
