WPS stands for Wifi Protected Setup. It is a simple way for non-technical folks to set up a wireless router within their location. The button is pressed essentially to let the router know that some device will soon be requesting to connect to it by WPS. The way this occurs is by first pressing the button on the router and then going to the device in question and have it initiate the connection to said router. Instead of asking for a WEP or WPA/WPA2 keycode, it will instead ask for the WPS key. This key is often found on a sticker on the router as a series of numbers (though it can be configured to a different value through the web interface if the router owner wishes to do so). Once the device and router speak with each other by WPS, the router lets the station know what parameters (such as the WEP or WPA/WPA2 key) are appropriate for the network in question and all is ready to go.
I have never used WPS when setting up client networks and generally turn it off since typing in the WPS code is no different than typing in the WEP or WPA/WPA2 keycode. As such, I see little need for the function.
No, you do not have to.
The router must have a special reset button, you have read manual because almost each brand has its own way to be reset.
Regular Internet service can become wireless Internet with the use of a wireless router. A wireless router does require the use of a power cord and a cat5 cable for setting the router up with the modem, but the Internet is transferred throughout your network without being connected by any wires. The router converts the Internet signal into WiFi signals for your network. In addition to a wireless router you need to have a wireless receiver for ever computer on your network.
It has to always be broadcasting radio waves otherwise no devices will ever find the router.
One of the advantages of purchasing a wireless router from BT is that it will also allow you to connect to BT hotspots, meaning that if there was ever a problem with your router, you could still connect to a hotspot, and would not lose internet connection between when the router failed and when the repair could be done.
Many of us have had the problem where we where limited to how we could arrange our house by the location of our cable out lets. With a wireless TV router we can move the TV where ever there is an electrical out let. The wireless TV router plugs into any cable outlet and transfers the cable signal wirelessly. Connect a wireless TV receiver to the TV and the receiver catches the wireless signals allowing you to watch cable with the outlet across the room.
Using a travel wireless router might be the best thing that you have ever done on a business trip. These types of routers can help to give you an internet signal even when you are not at home. These can be helpful in parks, bus stations, or hotel rooms that don't have their own wireless signal.
If you possess specialized software, you can do what ever you want if you have access to the network's router.
First off, the Router is wifi the modem isn't. The max distance anybody has ever gotten is 125 miles. It all depends on the equipment that you're using. Make sure to get a wireless router with an external antennae and you can use your own antenna. possibilities are limitless.
Possibly, possibly not. It is possible that the router will burn out at some point from use, but it is also possible that the router will not ever burn out (just lose its ability to do other things).
You can do this in a number of ways. The first is to add a password to the router, meaning that someone can only connect to the network using that password. Check the manufacturer's website to guide you how to access your own router and where you would find this function. The second possibilty is to hide the router's signal so that it doesn't broadcast the SSID. That way, unless you know the network is there and what the password is, you won't even be able to browse for it. Use a strong encryption on your routers wireless signal. Nothing less than WPA2 personal encryption. Use MAC filtering to grant access only to those computers on you know are on your local network and finally, disable the posibility of accessing your router's configuration page both from the internet AND from wireless connections. This second feature may be a bit annoying as you always need to be connected to your router in order to configure it, but it's worth the hassle for the additional level of security it provides. With all of these methods applied, no one will ever be able to steal your wireless connection.
No. Not ever.