You should read a graduated cylinder at eye level. See the related link for rules regarding menisci.
When you read a scale on the side of a container with a meniscus, such as a graduated cylinder or volumetric flask, it's important that the measurement accounts for the ... For mercury, take the measurement from the top of the meniscus. ...
Level with the bottom of the fluid's meniscus
The reading on the graduated scale is taken before and after the metal is lowered into the cylinder . The second reading is subtracted from the first. This gives the volume of the metal in cubic centimetres.
The numbers and make sure it's a exact amount you want or whatever .-.
A graduated cylinder is used for measuring liquid volumes accurately. By using a graduated cylinder, you can precisely measure out 100ml of liquid ensuring the correct volume is dispensed. The markings on the cylinder allow for easy reading and accurate measurement.
When reading a graduated cylinder, make sure your eye level is even with the meniscus - the curved surface of the liquid. Read the measurement at the bottom of the meniscus to get an accurate reading. Take into account any calibration markings on the graduated cylinder to ensure proper measurement precision.
Water in a glass graduated cylinder adheres to the sides of the cylinder, forming a meniscus which is an upward curve. When reading volume in a cylinder, look at the meniscus at eye level. Read the volume at the bottom of the curve.
When measuring volume in a graduated cylinder, you should read the level at the bottom of the meniscus, which is the curved surface of the liquid. Make sure your eye is level with the meniscus to avoid parallax error. The measurement should be taken at the lowest point of the curve for an accurate reading.
precision
When measuring volume in a graduated cylinder, you should use the bottom of the meniscus. The meniscus is the curved surface of the liquid, and the bottom point of this curve provides the most accurate reading. Always ensure your eye is level with the meniscus to avoid parallax errors.
The graduated cylinder is obviously graduated and the other one isn't.
it is important to keep the graduated cylinder on a flat surface when reading the meniscus so that your groogies dont escape and so that the results are good