0
On a 1999 S10 with a 2.2-liter engine, the mounting bracket typically secures the engine to the frame and is located on the driver's side of the engine block. It connects the engine to the chassis, providing stability and support. Ensure that the bracket aligns with the corresponding bolt holes on both the engine and the frame for proper installation. Always refer to a repair manual for specific details and torque specifications.
What else can I help you with?
Where is the electronic spark control module located on 87 s10 blazer?
It located as you are looking at the engine to the left of the tbi on a mounting bracket on top of the bracket it has a four wire connector connecting to the module
How many quarts of oil does a 1999 S10 4.3 liter need?
4.5 qts with filter change.
What is the front diff gear ratio on a 1999 Chevy blazer s10 4.3 LITER?
Same as the rear.
What is the mounting depth for door speakers on 1999 s10?
The mounting depth for door speakers in a 1999 Chevrolet S10 is typically around 2.5 to 3 inches. However, it's important to verify the specific speaker model since some aftermarket speakers may require more depth or have different mounting requirements. Always check the vehicle's manual or consult with a professional for precise measurements and compatibility.
What are the head bolt torque specs for a 1999 s10 4.3 liter v6?
I came to this stupid site to get answers not to give them. What a waste of time.
Will 1992 s10 rim fit on a 1999 s10?
No
Will a 4.3 liter engine from a 2000 s10 Chevy blazer fit a 1997 s10 Chevy blazer that also has a 4.3 liter engine?
Yes.
Is the fender for a 1995 s10 compatible with a 1999 s10?
Yes.
What is the 1999 Chevrolet s10 pickup tire size?
i have a 1999 stepside s10 and they are 205/75/r15
Will a 96 s10 4.3 manual transmission bell housing with internal slave sylander work on a 94 s10 blazer 4.3 manual transmission with external slave sylander?
ya it should work the only difference is slave cylinder mounting location you may need to replace the line going to the slave cylinder you may also need to fabricate a mounting bracket you may have to change the bellhousing and through out bearing fork
What is the best 6cyl engine to get for a replacement of a 97 Chevy S10 2.2L and will the transmission be able to match the mounting holes?
you can get the 2.5 liter and it should line up as long as you get the same year engine to line up on the tranmission.
Does a 2.2 liter 1998 Chevy s10 have a PCV valve?
No, it does not.
