0
What else can I help you with?
The function of hard drive cable?
To start, the hard drive cable connects your hard drive to your motherboard. Its really simple.
How do you connect the drive cable on model 917.376741?
To connect the drive cable on model 917.376741, first, ensure the lawn mower is turned off and unplugged for safety. Locate the drive cable housing and thread the cable through the appropriate brackets, ensuring it is properly aligned. Connect the cable to the drive control lever and secure it according to the manufacturer's specifications. Finally, check the tension and adjust as needed to ensure smooth operation.
In a system that uses a CD drive were the audio wire connects?
There is a data cable,and a power cable that connect the drive to your PC. Everything is done with the data cable, there is no audio or video wires.
How many pins on the ribbon cable are used to connect an IDE drive?
40
What two cables connect to the hard disk?
There are two cables that connect to the floppy drive in a desktop computer.There is a four pin power cableThere is a ribbon cable that has a part twisted end (the twisted end connects to the floppy drive).
How do you view images from Sony digital camera using PC?
Connect the appropriate cable to USB drive from the Camera. Then open your mycomputer you will find a removable drive. Double click on the drive you will find the images in a folder. Connect the appropriate cable to USB drive from the Camera. Then open your mycomputer you will find a removable drive. Double click on the drive you will find the images in a folder.
Is a 1.44 mb drive a DVD and how do you tell a DVD drive?
1.44MB drive is a floppy drive and not a DVD drive. DVD and CD drives are bigger in size and connect with a different cable (same as a PATA harddisk cable) on the motherboard. - Neeraj Sharma
Does a ribbon cable connect to the CPU?
No. It connects to the motherboard at one end, and a drive or device on the other.
What does an IDE do?
An IDE connector is used to connect a CD-ROM drive or hard drive to a motherboard, with a long and flat ribbon cable.
How does the Hard Drive connect to the mother board?
Hard Drives connect to the motherboard one of two ways. Either using a 40-wire/40-pin HDD ribbon cable, or an 80-wire/40-pin HDD ribbon cable. HDD stands for Hard Drive Disk.
How do you connect pata cables from motherboard to CD drive?
To connect PATA cables from the motherboard to a CD drive, first ensure the computer is powered off and unplugged. Locate the PATA connector on the motherboard and the CD drive; then, plug one end of the PATA cable into the drive and the other end into the motherboard. Make sure the drive is set to the correct jumper configuration (Master or Slave) as needed for your setup. Finally, connect the power cable to the CD drive and power on the computer.
What does an IDE connector do?
An IDE connector is used to connect a CD-ROM drive or hard drive to a motherboard, with a long and flat ribbon cable.
