The low coolant sensor on a 1993 Oldsmobile Delta is typically located in the coolant reservoir tank. It is usually mounted near the bottom of the tank and may be accessed by removing the reservoir from the vehicle. If you're looking for it, check for a wire harness connected to the sensor that indicates the coolant level. Always consult the vehicle’s service manual for precise location details and instructions.
Fuse 17 in a 1993 delta 88 Oldsmobile controls the air conditioner
what is the oxygen sensor location on a 1993 oldsmobile cutlass ciera 3.3l v6
on the distributor or near there
yes
To fix a water pump on a 1993 Oldsmobile Delta 88 with a 3.6 engine, first, ensure the engine is cool and disconnect the battery. Drain the coolant, then remove any components obstructing access to the water pump, such as the serpentine belt and any hoses. Unbolt the water pump and remove it, then clean the mounting surface before installing the new pump with a new gasket. Reassemble everything in reverse order, refill the coolant, and check for leaks after starting the engine.
No. My daughter has the same vehicle and for some reason, GM changed the models in 1993 to be unique to that car. The 1994 is different and the computer will not work, as well as some sensors, mounts, etc.
The low coolant level sensor is located in the top of the coolant reservoir o n the drivers side behind the battery www.lextechautomotivellc.com
On the coolant overflow bottle that in on the passenger side of the engine.
Some vehicles have two these days. One is for the ecm and the other is for the gauge. Coolant sensor is for the ecm, I think.
Here is 1993 Oldsmobile Delta 88 3.8 liter V-6 since you didn't provide the year of yours. [http://autorepair.about.com/library/firing_orders/bl-fo-8157.htm 93 Delta 88]
in the intake air box
The cooling fan on a 1993 Oldsmobile Delta 88 is located behind the radiator and the wires are attached on the left hand side. The relay is located on the frame near the left headlight.