0
What else can I help you with?
What does switch' MAC address table keeps track of?
The switch keeps track of which computers (identified through their MAC addresses) are connected to which switch ports.The switch keeps track of which computers (identified through their MAC addresses) are connected to which switch ports.The switch keeps track of which computers (identified through their MAC addresses) are connected to which switch ports.The switch keeps track of which computers (identified through their MAC addresses) are connected to which switch ports.
Which type of network device keeps a table of the MAC addresses of the devices connected to it?
The correct answer is switch.
How switch works in terms of knowing how to forward message frames?
A switch builds a table of MAC addresses as it passes packets from port to port; ARP requests help with this by requiring clients that are connected to the switch reveal what their IP and MAC addresses are.
Which describes the funtionality of a switch?
They operate at Layer 2 of the OSI model and forward data to the port on which the destination system is connected by using MAC addresses of connected devices.
What is the purpose of including the destination address and source address fields in an ethernet frame?
Destination address is used to identify the recipient. Thus, a switch can send the frame out the correct port, and the receiving computer can confirm that the frame is for that computer and not for any other computer.Source address allows the receiving computer to know where to send the reply. It also helps a switch learn MAC addresses (learn which MAC addresses are connected to which switch ports).Destination address is used to identify the recipient. Thus, a switch can send the frame out the correct port, and the receiving computer can confirm that the frame is for that computer and not for any other computer.Source address allows the receiving computer to know where to send the reply. It also helps a switch learn MAC addresses (learn which MAC addresses are connected to which switch ports).Destination address is used to identify the recipient. Thus, a switch can send the frame out the correct port, and the receiving computer can confirm that the frame is for that computer and not for any other computer.Source address allows the receiving computer to know where to send the reply. It also helps a switch learn MAC addresses (learn which MAC addresses are connected to which switch ports).Destination address is used to identify the recipient. Thus, a switch can send the frame out the correct port, and the receiving computer can confirm that the frame is for that computer and not for any other computer.Source address allows the receiving computer to know where to send the reply. It also helps a switch learn MAC addresses (learn which MAC addresses are connected to which switch ports).
What would be the result if the MAC address table was flushed of dynamic entries?
The switch would broadcast frames out each port except the originating port until the switch learned all the MAC addresses connected to the switch.
Which command is used to checking whether two switches are connected are not?
To check whether two switches are connected, you can use the ping command from the command line interface (CLI) of a device connected to one of the switches. By pinging the IP address of the other switch, you can determine if there is connectivity between them. If the ping is successful, the switches are connected; if it fails, there may be a connectivity issue. Additionally, using commands like show cdp neighbors (for Cisco devices) can provide information about directly connected devices.
What is a hub switch typically used for?
Hubs and switches are different types of network equipment that connect devices. A hub usually connects computers to other computers. A switch is the next step up from a switch and it records the IP and MAC addresses of the devices connected to it.
Where is the main switch connected?
the main switch is connected in the center of the panel
Can two pcs without ip addresses connected through a switch communicate?
No, even though the two PCs are physically connected they need an IP address to communicate. The switch uses the MAC physical address to determine the switching but the network software requires an IP address and a subnet mask attached to the adaptor.
Why do headlights and marker lights turn on when battery is connected headlight switch off on 1997 Dodge Intrepid?
command start malfunction, disconnect, problem solved.
What two methods can be used to remove MAC address table entries from a switch?
Power cycle the switch to clear all dynamically learned addresses, and the clear mac address table command will remove statically and dynamically configured table entires
