0
What else can I help you with?
What filters network traffic using hardware addresses and what directs packets between network segments using network addresses?
bridge filters router directs
Which Device can be used to connect two similar network segments but keeps network traffic separate on the two segments?
Bridge
The part of a network to which segments and significant shared devices connect?
backbone
What type of device do you need if you want to connect two network segments together such as a wireless network and a wired network?
bridge
What are the characteristics of a brouter?
A brouter is a network device that combines the functions of a bridge and a router. It operates at both the data link layer and the network layer, allowing it to forward data between different network segments while also making routing decisions based on IP addresses. Brouters are typically used to connect different types of networks, facilitating communication and improving network performance. They can manage traffic efficiently by filtering and directing data packets according to specific rules.
Is it possible to have two network interface Cards in a device and its use?
Yes; a computer can have two network cards, to connect to two different networks.Yes; a computer can have two network cards, to connect to two different networks.Yes; a computer can have two network cards, to connect to two different networks.Yes; a computer can have two network cards, to connect to two different networks.
What is Transparent Bridge?
A Transparent Bridge is a networking device that connects different segments of a local area network (LAN) while operating at the data link layer (Layer 2) of the OSI model. It transparently forwards data packets based on MAC addresses, allowing devices on different segments to communicate as if they are on the same network. This helps reduce network traffic and improve performance by dividing large networks into smaller, more manageable segments. Transparent bridges are often used in Ethernet networks to extend the range and efficiency of communication.
What type of addresses do bridges do?
Bridges primarily operate at the Data Link Layer (Layer 2) of the OSI model and use MAC (Media Access Control) addresses to forward data frames between different network segments. By analyzing the MAC addresses in the Ethernet frames, bridges can determine whether to forward or filter traffic, thereby reducing collisions and improving overall network performance. They do not use IP addresses, which operate at Layer 3, and are primarily concerned with local network traffic.
Segments and shared devices connect to?
Segments and shared devices connect to a network, enabling communication and data exchange among multiple users and devices. Segments can refer to specific portions of a network, enhancing organization and efficiency, while shared devices, like printers or servers, provide resources accessible to all connected users. Together, they facilitate collaboration and resource sharing within a networked environment.
Explain the following network topologies Bus Star Ring and Mesh You can draw figure to explain?
a topology is a way to connect the network system. we can connect network with different types ring ,bus and mash is a topology or way to show connect network with different types in ring topology the systems which we want to connect in network in the form of ring
In packet routing MAC addresses (physical addresses) will change from?
In packet routing, MAC addresses (Media Access Control addresses) change at each hop between different network segments, as they are specific to the local network's data link layer. When a packet traverses from one network to another, the source MAC address will be that of the sending device, and the destination MAC address will be that of the next device in the path, typically the router's interface. This process continues until the packet reaches its final destination, where the MAC address will correspond to the end device on the local network. Thus, while the IP address remains constant throughout the journey, the MAC addresses change at each segment.
Which type of remote wireless bridge connection is used to connect multiple LAN segments together?
When one wants to connect multiple LAN segments together, the point-to-multipoint type of remote wireless bridge is used. The connection avails the network resources.
