0
The SATA III (Serial ATA III) interface supports a bit rate of 6 Gbps. This interface is commonly used for connecting hard drives and solid-state drives to a computer's motherboard. SATA III provides improved data transfer speeds compared to its predecessor, SATA II, which has a maximum bit rate of 3 Gbps.
What else can I help you with?
Bit Rate Interface?
Bit rate interface is another name for basic rate interface, or BRI. BRI is used in ISDN configurations for voice-grade telephone operations.
Why set clock rate in router?
To configure the clock rate for the hardware connections on serial interfaces such as network interface modules (NIMs) and interface processors to an acceptable bit rate, use the clock rate interface configuration command. Use the no form of this command to remove the clock rate if you change the interface from a DCE to a DTE device. Using the no form of this command on a DCE interface sets the clock rate to the hardware-dependent default value.
The fastest data rate an IrDA device supports is 4 Mbps what IrPHY supports this rate as the highest data rate?
FIR
What is BRI?
It stands for Basic Rate Interface. In the Integrated Services Digital Network (ISDN), there are two levels of service: the Basic Rate Interface (BRI), intended for the home and small enterprise, and the Primary Rate Interface (PRI), for larger users.
What is a basic rate interface?
A basic rate interface is an ISDN subscriber line which provides two B channels and one D channel.
For what does PRI stand?
Primary Rate Interface
Which is better for your eyes a monitor that supports 75hz refresh rate or one that supports 60hz refresh rate?
75 Hz
When must a router serial interface be configured with the clock rate command?
When the interface is functioning as a DCE device
What is the result of using the clock rate 56000 command at the serial interface of the router?
The interface is configured as a DCE device.
What is the full form of PRI lines?
Primary rate interface
Does the Toshiba Stata DK280 use primary rate interface or basic rate interface?
It can do both. In order to use VoIP you have to get a PRI card, which cost used about US$699 (model no. RPTU PRI).
What standard interface supports the highest data transfer rate?
Check on the Related Link to look for the Fastest Internet in your Area.
