0
What else can I help you with?
Which routing protocols are classless?
RIPv2 and EIGRP
What is the differences between routing and routed protocols?
Routing protocols are used by routers (RIP, EIGRP, OSPF) Routed protocols are the actual protocols on the wire (TCP/IP)
What is EIGRP for cisco protocols?
Enhanced Interior Gateway Routing Protocol (EIGRP) was once as Cisco Propitiatory routing protocol for Cisco routers. However many routers that are not Cisco now support the use of EIGRP.
Which routing protocols performs auto summarization default?
RIP version 2, EIGRP
Which routing protocol has the most trustworthy administrative distance by default?
generally static routing protocol has the most trustworthy administrative distance .i.e; 1 and in dynamic routing protocols EIGRP has the best AD.
A router has learned two equal cost paths to a remote network via the eigrp and rip protocols. Both protocols are using their default configurations. Which path to the remote network will be installed?
When you have multiple routing protocols running (e.g. RIP, OSPF, EIGRP), the one with the lowest administrative distance is used for the routing table. The metric is different; it's used within the routing protocol to determine which route is best to a certain network. EIGRP has a AD of 90. RIP has an AD of 120. Since EIGRP has a lower AD, it will be used for the routing table.
What do you mean by classless addressing?
CLASSFUL ROUTING PROTOCOL. It means it will not carry the routing mask information while routing updates or routing advertisements. it will carry just only the ip-address information's. It will assume just default mask information's. Example : class-A 255.0.0.0 Class-B 255.255.0.0 Class-C 255.255.255.0 So classful routing protocols will not support the VLSM and Supernetting Example of classful routing protocols is 1. RIP V1 2. IGRP CLASSLESS ROUTING PROTOCOL These kind of routing protocols will carry the subnet mask information's while doing the routing updates or routing advertisements. So it will support the VLSM and Supernetting, also support noncontiguous networks Example RIP V2 EIGRP OSPF CLASSFUL ROUTING PROTOCOL. It means it will not carry the routing mask information while routing updates or routing advertisements. it will carry just only the ip-address information's. It will assume just default mask information's. Example : class-A 255.0.0.0 Class-B 255.255.0.0 Class-C 255.255.255.0 So classful routing protocols will not support the VLSM and Supernetting Example of classful routing protocols is 1. RIP V1 2. IGRP CLASSLESS ROUTING PROTOCOL These kind of routing protocols will carry the subnet mask information's while doing the routing updates or routing advertisements. So it will support the VLSM and Supernetting, also support noncontiguous networks Example RIP V2 EIGRP OSPF
What protocol work with a router?
Routers work with many different kinds of protocols, for different purposes. They work with layer-3 protocols such as IP and IPX, with routing protocols such as RIP, EIGRP, and OSPF, with VLAN-specific protocols, with DHCP, Telnet, and many others more.Routers work with many different kinds of protocols, for different purposes. They work with layer-3 protocols such as IP and IPX, with routing protocols such as RIP, EIGRP, and OSPF, with VLAN-specific protocols, with DHCP, Telnet, and many others more.Routers work with many different kinds of protocols, for different purposes. They work with layer-3 protocols such as IP and IPX, with routing protocols such as RIP, EIGRP, and OSPF, with VLAN-specific protocols, with DHCP, Telnet, and many others more.Routers work with many different kinds of protocols, for different purposes. They work with layer-3 protocols such as IP and IPX, with routing protocols such as RIP, EIGRP, and OSPF, with VLAN-specific protocols, with DHCP, Telnet, and many others more.
What is Distance Vector protocols?
Distance vector protocols are routing protocols that use the distance and direction to a destination network to make routing decisions. Examples include RIP (Routing Information Protocol) and EIGRP (Enhanced Interior Gateway Routing Protocol). These protocols share routing information with neighboring routers and update their routing tables based on the information received.
Ccna2 version 4.0 chapter 11?
Router R1 is participating in the OSPF routing protocol as well as the EIGRP routing protocol. If R1 learns of network 192.168.10.0/24 from both the OSPF and internal EIGRP routing protocols, how will the route appear in the routing table of R1?
Which protocol used for routing?
A routing protocol is a protocol that routers use to tell each other about available routes. Some of the routing protocols include RIP, EIGRP, OSPF, IS-IS, BGP.
What three routing protocols are distance vector routing protocols?
Routing Information Protocol (RIP) and Interior Gateway Routing Protocol (IGRP) are two very popular Distance Vector routing protocols
