If they were, the devices would all have to have a separate interpreter for the processor and in order to communicate amongst themselves they'd have to go through the processor, which would slow the computer down. If everything is connected to the motherboard and the motherboard interprets everything for the processor, it's cheaper and faster.
Memory drives are peripheral devices that are very useful
Peripheral devices are connected and logged to the CPU through interfaces like USB, SATA, or PCIe, which facilitate communication between the device and the processor. When a peripheral is connected, the operating system detects it using device drivers that manage data transfer and functionality. The CPU then communicates with the device through memory-mapped I/O or direct I/O, allowing the system to recognize and interact with the peripheral efficiently.
A PC card is used to connect peripheral devices to a notebook computer.
No. It is not a part of CPU but an external peripheral connected to it.
Expansion Boards
The camera memory card does not need to be directly installed into the Pictbridge port on the printer. The Pictbridge port is a receptacle that when properly connected can allow easy transfer of compatible devices.
In the 8085 microprocessor, peripheral devices are connected through the Input/Output (I/O) ports. The microprocessor has a total of 16 address lines, allowing it to address up to 256 I/O ports (from 00H to FFH). Peripheral devices can be interfaced using either memory-mapped I/O or I/O-mapped I/O, depending on the specific design of the system. Typically, the connection is established through interfacing circuits like decoders, which help in selecting the appropriate device for communication.
Peripheral devise are the computer devices that are connected to the computer externally such as printer, scanner, keyboard, mouse, tape device, microphone and external modem. They can be internal such as CD-ROM or internal modem and external as the scanner, printer and Zip drive. Peripheral devices can be classified according to their functions.InputInput devices are the type of the computer devices that are used to provide the control signals to the computer. Keyboard and the Mouse are the examples of the input devices.OutputOutput devices are the devices that are used to display the results. Printer, scanner, speaker and the monitor are the examples of the output devices.StorageA storage device is a device that is used to store the information such as hard disk drive, flash drive, floppy disk and the tape drive.
PCI commands are instructions used in the Peripheral Component Interconnect (PCI) protocol to manage and control devices connected to the PCI bus. These commands include configuration space access commands, such as reading and writing configuration registers, as well as memory and I/O operations for data transfer. Common PCI commands include Memory Read, Memory Write, I/O Read, and I/O Write. These commands facilitate communication between the CPU and peripheral devices, enabling efficient data handling and device management.
AOU The first advantage is a great reduction in number of peripheral devices. The two cores can share memory resources, so the number of memory devices can also be reduced. Furthermore, space-saving benefits from shared I/O and bus can also be expected.
so as to infom the processor of what it ought to do
what manages the computers hardware? THE TEXTBOOK ANSWER IS THE OPERATING SYSTEM