The same area ID network addresses and wildcard masks
You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).
there are two types of addresses: network addresses and physical addresses
It can provide a list of physical addresses on the network
No. If you have one IP per customer, you don't need to create smaller subnets. (You won't have enough addresses though - the first and last addresses of the block will be the network and broadcast addresses and won't be useable. You'll only have 1022 usable addresses)
Network layer
One - by your problem statement, all addresses are part of the same network. The number of host addresses is 232-21 - 2, or about 2000.One - by your problem statement, all addresses are part of the same network. The number of host addresses is 232-21 - 2, or about 2000.One - by your problem statement, all addresses are part of the same network. The number of host addresses is 232-21 - 2, or about 2000.One - by your problem statement, all addresses are part of the same network. The number of host addresses is 232-21 - 2, or about 2000.
•If the hosts on a network using private IP addresses need to access the Internet, a problem arises because the private IP addresses are not allowed on the Internet. •The solution is to use NAT (Network Address Translation), which uses a single public IP address to access the Internet on behalf of all hosts on the network using other IP addresses.
You need to use a network scanning tool, of which there are several, including nmap, netchk, The Dude, etc.
summary addresses
If uptime is important to you, then yes.
Network Layer