0
Yes, the main reason is switch is an inteligent device for routing IP Packet. It substitute conventional hub which is not smart because it broadcast IP packet to all its port. This impact to network performance because IP packet flooding network. While switch have internal routing table that can help switch to forwarding to a exact port where the destination host is connected to its switch port.
What else can I help you with?
Why do you call router as layer three device?
Routers operate in layer 3 because they must use the logical network address to determine which network to route the packet to. Logical addressing is a feature of layer 3, therefore a router is a layer 3 device.
What logical protocols must be configured for internet connectivity?
computer networking
At a minimum What devices must you add to his current networking hardware?
a hub
Contact with foreign nationals through social networking sites must be reported.?
TRUE
If a router receives a packet that it does not know how to forward what type of route must be configured on the router to prevent the router from dropping it?
The default route must be configured such as: Ip route 0.0.0.0 0.0.0.0 serial 0/0 etc.
Were to find three regis?
Regice: Route 105 Regirock: Route 111 Registeel: Route 120 You must defeat the Elite Four first.
How many switch must the bulb need if there are 2 batteries?
A bulb must have a minimum of 1 switch if there are 2 batteries. The batteries can be connected in together via wires to prevent the need for a second switch.
How do you get a Ditto in Pearl?
at the route 218 but you must use pokeradar
How do you get to the peak of mount coronet?
You must go to hearthrome city and then to route 208 at the end of the route you will see a cave in and then you should go up and right.......also you must have rock climb......
How do I switch my internet to a wireless plan?
Cancel your current Internet plan. If you have a wireless carier that offers nationwide wireless Internet service, sign up for wireless plan, which may require that you purchase a wireless networking card. If you do not have a wireless carrier, then you may have to sign up with one. You must first get a wireless router and install it on your computer. Then you need to log in and switch your internet to the router's setting.
Where is the headlight switch on a 1979 camaro Z28?
The switch is to the left of the instrument panel below the wiper switch. To get to it you must remove the panel surrounding it.
Why must you use a console connection to initially configure the switch why not to the switch via telnet or ssh?
If you've got a new switch, all basic settings must be configured using a console cable. SSHing or telnetting to a switch is imposible without an IP address. Therefore you must first configure all the basic settings via console.
