The Windows command arp stands for address resolution protocol which simply transforms an IP address to its corresponding physical network address.And 'arp -a' simply lists down the physical network addresses of the network devices connected to the current PC.
The Windows command arp stands for address resolution protocol which simply transforms an IP address to its corresponding physical network address.And 'arp -a' simply lists down the physical network addresses of the network devices connected to the current PC.
When you ping a PC, your computer first checks its ARP (Address Resolution Protocol) cache to see if it already has the MAC address associated with the target IP address. If the MAC address is not found in the cache, your PC sends an ARP request to the local network, asking "Who has this IP address?" The device with the matching IP address responds with its MAC address, allowing your PC to store it in the ARP cache for future communications. This process enables the delivery of packets over the local network.
The PC sends out a broadcast ARP (Address Resolution Protocol) request before the first ping request to determine the MAC address of the target device corresponding to its IP address. Since IP communication requires the MAC address for packet delivery on a local network, the broadcast ensures that all devices on the network segment receive the request. The target device will respond with its MAC address, allowing the PC to encapsulate the ping request in Ethernet frames for proper transmission.
they are devices that can be attached to a PC such as webcamb, joystick, scanner etc.
what do you mean by memory devices?how it is implement with the pc software
it depends what you have it for xbox360 or PC if it doesnt show on your 360 its probably messed up but on your PC you either don't have the right graphics card or not enough space it depends what you have it for xbox360 or PC if it doesnt show on your 360 its probably messed up but on your PC you either don't have the right graphics card or not enough space
yes
may be processor
People are able to access a PC from their smart phones and other electronic devices they own. Electronic devices can be accessed anywhere at any given time.
"RJ-45 Cross cable" is required for a direct ethernet connetion between two pcsbetween the same type of network devices (PC-to-PC, switch-to-switch, router-to-PC (Note: router and PC are LIKE devices, because both are DTE)) you use Crossover cable.to connect different type of devices (PC-to-switch, PC-to-router ..) you use Straight Through cable.
DragonVale is not available as a website or for the PC. It can only be played on mobile iOS devices.