Firstly it's called Gigabit and Megabit network cards.
Gigabit is ten times faster. 100mbit vs 1000mbit :)
The MHz is the speed of the memory, while the MB or GB is the capacity. Put much more stock in the capacity (MB or GB) than the speed.
Actually it is quite the opposite. The more RAM you have the more speed at which data can be transferred to the RAM. An example is if you have 512 Mb of RAM then 512 Mb of data will be transferred to the RAM at a time, but if you upgrade it to 1 GB of RAM then 1 GB of data will be transferred to the RAM at a time verses the 512 Mb. So the speed at which the RAM stores data will increase if the size of the RAM is increased. I hope this answers your question.
A Gb is a Gigabyte. A MB is a Megabyte, These terms represent digital storage capacity, not speed. Speed would be measured in terms like Gigahertz or Megahertz. And of course since Giga is a larger prefix than Mega, Gigabytes would be faster.
The memory of a computer is measured in bits, most commonly megabytes (MB) and gigabytes (GB). The speed of a computer is measured in Ghz.
The difference between a gigabyte router and a regular router is the speed it proceses. A normal router has a speed of 100 megabytes per second, a gigabyte is 1000 megabytes per second. This is the speed information travel from the router to your computer. If you're looking into buying a router, get the gigabyte one. Note that this is not the speed of the wireless connection your wireless router provides - it is the speed of the wired network ports on its back. The actual speed of the wireless connection is denoted by a letter; either b, g or n. N is the fastest wireless connection available today, and is usually backwards compatible with b and g type wireless network cards.
MB stands for mobile broadband. Mobile broadband is used in cell phones, and refers to the high-speed internet capacity. 3G is a type of mobile broadband that describes how fast the internet speed is.
KB (kilobyte), MB (megabyte), and GB (gigabyte) are units of digital information storage, often used to quantify file sizes and data transfer rates. 1 KB equals 1,024 bytes, 1 MB equals 1,024 KB, and 1 GB equals 1,024 MB. While they primarily measure data volume, they can indirectly relate to time, as larger file sizes generally take longer to download or process depending on the speed of the network or device. For example, transferring a 1 GB file will typically take longer than a 1 MB file over the same internet connection.
GB= Gigabyte. There are 1000 MB in 1 Gigabyte. A MB is a Megabyte. it has 1000 KB. KB is kilobyte, it has 1000 bits.
The speed for magnetic tape can vary depending on the specific tape drive and settings used. Generally, tape drives have a data transfer rate measured in MB/s (megabytes per second) or GB/s (gigabytes per second). Modern tape drives can have speeds ranging from tens to hundreds of MB/s.
0.14 is a number. If you give a unit of measure (mb/sec, gb/sec) it can be determined.
10 MB mean 10 Megabytes.It is an amount of data, there are 1024 Megabytes in a Gigabyte(GB), there are 1024 Kilobytes(KB) in a Megabyte, there are 1024 Bytes in a Kilobyte.A song file might be 5 MB, so if you had two of it, then you would have 10MBs of data.Note: MB (All capitols) means Megabytes, while Mb (Lower case 'B') means Megabit, there are 8 Megabits in a Megabyte, there are 8 Bits is a Byte.
To calculate the time it takes to download 10,000 GB on a 100 Mb line, first convert the download speed to gigabytes per second: 100 Mb equals 12.5 MB (megabytes) per second, or approximately 0.0125 GB per second. Therefore, downloading 10,000 GB would take about 10,000 GB ÷ 0.0125 GB/s = 800,000 seconds, which is roughly 9.26 days.