If the battery of your Nissan Pulsar is flat and the radio is asking for a code, you will typically need to retrieve the radio security code. This code is often found in the owner's manual or on a card that came with the vehicle. If you can't find it, you can contact a Nissan dealership with your Vehicle Identification Number (VIN) to obtain the code. Once you have the code, turn on the radio and enter the code using the preset buttons.
Nissan pulsar radio pin 4362 Nissan pulsar radio pin 4362
Take your car to the Nissan dealers they can locate the security code for the radio by the VIN number from the car.
To remove the radio from a Nissan Pulsar, start by disconnecting the battery to ensure safety. Use a trim removal tool to gently pry off the trim panel surrounding the radio, being careful not to damage any clips. Once the trim is removed, unscrew the radio mounting screws and carefully pull the radio unit out. Finally, disconnect the wiring harness and antenna cable from the back of the radio.
To reset the radio code on a 2003 Nissan Pulsar, first, ensure the car is turned on and the radio is powered off. Then, turn the radio back on; it should display “CODE” or “LOCK.” Enter the correct code using the radio preset buttons (usually found in the owner's manual). If you don't have the code, you'll need to contact a Nissan dealership or refer to your vehicle's documentation for assistance.
To reset the radio code on a 1997 Nissan Pulsar, you typically need to enter a specific code provided by the manufacturer or your dealership. If you don’t have the code, check your owner’s manual or contact a Nissan dealer for assistance. Once you have the code, turn on the radio, and use the preset buttons to enter the code. If entered correctly, the radio should unlock and resume normal operation.
Ring Nissan Australia on 1800 035 035 , tell them the vin number and they will give you the code over the phone
The radio unit is linked to the car's NATS immobiliser. If the radio unit is installed into another car, an error message of "SECURE" will appear. Contact Nissan dealer, they should be able to recode it or to send it to a Clarion service to be recoded.
In order to recode the radio in your?æ1995 Toyota 4 Runner you will need the old radio code. You can obtain this code by contacting the Toyota company.
That would be called a "pulsar". See related question
Assuming it's like my Ford , you have to reset the preset radio stations every time a battery cable is disconnected
Pop you hood. to the left of your battery there is a fuse box. Open the fuse box. On the side closest to the battery, remove the first fuse labeled "20". That is the fuse for the stereo and radio on a 2004 nissan maxima.
To recode the radio in a Renault Espace, first, turn on the ignition and the radio. If it prompts for a code, you will need the security code that came with the vehicle or the radio's manual. Enter the code using the preset buttons on the radio. If you enter the code incorrectly multiple times, the radio may lock, requiring a reset or assistance from a dealer.