0
What else can I help you with?
Will 10a 125v power cord power a10a 250v?
no
Can you use a 125V 15A fuse to replace a 250V 10A fuse?
No, it is not safe to replace a 250V 10A fuse with a 125V 15A fuse. The voltage rating of the fuse must be equal to or greater than the system voltage, and the amperage rating must be equal to or lower than the rated current of the circuit. Using a lower voltage or higher amperage fuse can lead to safety hazards, including potential fire risks.
Can you substitute 10A 250V plug with 6A 240v plug?
No, it is not safe to substitute a 10A 250V plug with a 6A 240V plug. The ampere rating of the plug needs to be compatible with the device's power requirements to avoid overheating or damage. It is recommended to use a plug that matches the original specifications of the device.
Can I use a 10A 250V power cord on a tv with input 100-240V?
Yes, you can use a 10A 250V power cord on a TV that supports input of 100-240V. The current rating of the power cord (10A) is within the range supported by the TV. Just ensure the plug fits securely into the TV's power input.
Can you substitute 6a 250v with 10a 250v?
Yes, you can substitute a 6A 250V component with a 10A 250V component as long as the voltage rating is the same and the application does not exceed the 10A current rating. The higher-rated component can handle more current, making it a suitable replacement. However, ensure that other specifications, such as physical size and connection compatibility, are also met. Always consult relevant guidelines to ensure safety and compliance.
Can you use 125v 2a fuse to replace a 125v 10a?
No, you cannot use a 125V 2A fuse to replace a 125V 10A fuse. The lower-rated 2A fuse will blow under normal operating conditions if the current exceeds 2 amps, while the 10A fuse is designed to handle higher current levels without blowing. Using a fuse with a lower amperage rating than required can lead to frequent outages and potential damage to the circuit or devices. Always replace a fuse with one that matches the original's specifications.
Can you replace a ksd301g 125v 16a 240 temp switch with a ksd301 125a 10a 250 temp switch?
No, you cannot directly replace a KSD301G 125V 16A 240°C temperature switch with a KSD301 125V 10A 250°C temperature switch. The KSD301G has a higher current rating (16A) compared to the KSD301 (10A), meaning it can handle more current without overheating or failing. Additionally, while the KSD301 has a higher temperature rating, the difference in specifications may affect performance and safety, so using components with matching ratings is crucial.
What happens when a 250V 2500W water heater is connected to mains supply with a 5A fuse?
When a 250V, 2500W water heater is connected to a mains supply with a 5A fuse, the fuse will likely blow. This is because the heater draws approximately 10A (calculated by dividing the power, 2500W, by the voltage, 250V), which exceeds the 5A rating of the fuse. As a result, the fuse will interrupt the circuit to prevent overheating or damage, preventing the water heater from operating.
What is 10a 3a - 4a?
10a − 3 − 4a
How do you simplify 10a-4parentheis A plus 2 parentheis?
to solve this expression: 10a-4(a+2) -> 10a-4(a)-4(2) -> 10a-4a-8 -> 6a-8
What does 10a-6 equal What does a equal?
16
What is 10a plus 3a-4a?
10a + 3a - 4a = 9a
