Yea mate, is meant to connect to your handbrake usually but just join it to your earth wire.
Connect the brake wire which is the color pink to the negative wire and there you go
ground pink wire
disconnect the orange wire don't need it that should fix it
I have a clarion unit and what i did was run the green brake wire to chassis ground, tap in a toggle switch by cutting the green wire & wiring the green wire to the toggle switch. When the clarion unit is on all you have to do is turn the switch off then on, and that will bypass the brake switch allowing to watch video moving or sitting. Mine works perfect.
Take the pink or green wire and ground it to something metal... same way a parking would work...
the wire needs ground to function. Connecting it to the ebrake allows it to ground so just connect the video wire to any ground and it will function as if it was connected to the ebrake
Easy, Ground it with your stereo ground wire.... (make the pink wire and black wire connect to the Main Ground wire which is also Black)
This is illegal in most states. No info can be given.
Its very simple to bypass the parking brake on Kenwoods. All the parking brake wire is is a ground wire. So, all you need to do is take the parking brake wire and either ground it or join it to the ground wire on the harness by soldering or whatever you wanna do.
If your attempting to install a DVD player (in dash) in your car and need to bypass the brake light wire in order to be able to play it while driving its not too difficult. the brake light wire goes hot when the brake is applyied (to power the brake light itself) the DVD player uses this wire to know when the brake light is on or off based on if the wire is "hot" or not. simply splice the wire into a constant power source like the main power wire to your in dash unit.
If you're wanting to watch DVD's or use the rear camera while not in park, ground the pink "Brake" wire. Don't connect to 12v. Must ground it.
Just ground the wire.