you can always less less wattage. for safety, never use more wattage recommended due to fire hazard.
Almost twice as much as 100 is almost twice 60.
It would use less electrical energy to burn the 60 watt light bulb for 900 seconds. This is because the total energy consumed is calculated by multiplying the power (in watts) by the time (in seconds), so for the 60 watt bulb: 60 watts * 900 seconds = 54,000 watt-seconds, and for the 100 watt bulb: 100 watts * 500 seconds = 50,000 watt-seconds.
40 watts of consumed power. The light output may be greater with one compared to the other, but wattage alone does not give us that information. Electric heaters, for example, consume 1500 watts of power and produce almost no visible light.Check the Lumen's. That is where the difference is.Current draw and light output.A 60 watt bulb uses 60 watts of electricity (i.e. it converts 60 joules of energy per second), a 100 watt bulb converts 100 joules per second. Electrical power is measured in watts. Since a 60 watt bulb pulls less energy to it than a 100 watt bulb the 60 watt bulb will not be as bright.Resistance.Just in the amount of power used and the brightness of the bulb. The 60 watt bulb might be a bit smaller.
Original answer: Because it gives off more power. Updated answer: In general, because the 100-watt bulb produces more total light (lumens) because it also consumes more power than the 60-watt bulb. However, a 60-watt can produce more lumens than a 100-watt bulb, depending on the types of bulbs in question.
Yes.
power difference
yes the bulb will actually last longer
A 60 watt bulb uses 60 watts of power continuously per second. It is consistent with the definition of power, which is the rate at which energy is consumed or produced. Therefore, a 60 watt bulb would use the same amount of power as another 60 watt bulb within the same timeframe of a second.
A watt is a measurement of electricity, usually pertaining to light. Light bulbs luminosity is graded by wattage, such as a 60 watt bulb, 100 watt bulb and so on. You would find a watt in a light bulb, to start.
100
Those numbers describe the power used by the two bulbs, in other words how many joules of electrical energy they use per second. The 100 watt bulb uses 40 watts more.
Those numbers describe the power used by the two bulbs, in other words how many joules of electrical energy they use per second. The 100 watt bulb uses 40 watts more.