0
The highest voltage that four AA batteries can be delivering is 6 volts,
if they're connected in series, and they may not be. The effect of 9 volts
on the device depends on the specific device. But we know that 9 volts
is at least 50% overvoltage to the device and possibly more. Chances are
high that the device won't like it, and will fail.
('Fail' is engineer talk for 'burn out' or 'burn up'.)
What else can I help you with?
Can you use a device that requires 500mA on a 1000mA adapter?
Yes, no problem whatsoever as long as the voltages are the same. The adapter's capacity is 1000 mA and your device only requires 500 mA. The draw from the adapter is only at 50%.
Is it ok to use a 5V 2a adapter on device that requires 4.5V DC 700 mA?
No
Can you use 500 ma power adapter on a device that requires 625 ma?
No, the capacity of the device is too large. The adapter will heat up and may even burn its internal windings open.
How can I use a cross brand battery adapter to power different electronic devices with various battery types?
To use a cross-brand battery adapter to power different electronic devices with various battery types, first ensure the adapter is compatible with the devices and batteries. Then, insert the appropriate batteries into the adapter and connect it to the device. Make sure to follow the manufacturer's instructions and safety guidelines when using the adapter.
Can you use a 12v power adapter when device requires 6v?
No, twice the voltage applied to a device that only requires 6 volts will probably destroy the device. When a manufacturer of equipment states a required voltage for a device that is the voltage that must be used.
Is it ok to use a 4.5V or 6V from a universal ac adapter 1300ma for device that requires 5V dc?
yes, depends on equipment..
Will a 9v DC adapter damage a device that requires a 6v DC adapter?
Yes, the manufacturer specifies what the working voltage of a device will be and that voltage has to be adhered to.
Can you use 12vdc 1000ma adapter to replace 12vdc 120ma?
Yes, you can use a 12V DC 1000mA adapter to replace a 12V DC 120mA adapter, as the new adapter provides a higher current capacity than needed. The device will only draw the current it requires (120mA) from the adapter, so it will operate safely. However, ensure that the voltage matches and that the polarity is correct to avoid damaging the device.
Can 12V 1A adapter be used for 12V 2A device?
no, it may damage the appliance.1Can_12V_2A_adapter_be_used_for_12V_1A_device, 2a adapter cannot be used for 12v, 1a device if the so mentioned parameters are input parameters of the device.Yes, a 12 volt 2 amp adapter has more that enough capacity to operate a 12 volt 1 amp device. In fact the adapter can operate devices up to a limit of 12 volts 2 amps. A device larger than 2 amps connected will tend to heat the adapter up and eventually cause it to fail.
Can you use a 1A adapter instead of a 500mA adapter?
Oh, dude, using a 1A adapter instead of a 500mA one is like using a sledgehammer to crack a nut. Technically, you can use it because it provides more current, but it might be overkill for the device and could potentially damage it. So, like, proceed with caution and maybe just stick to what the manufacturer recommends, you know?
Can you use a 300mA adaptor on a 1A device?
Yes, you can use a 300mA adapter on a 1A device, but it may not work properly or could damage the adapter. The device may draw more current than the adapter can provide, leading to insufficient power, potential overheating, or failure of the adapter. It's always best to use an adapter that meets or exceeds the device's current requirements for optimal performance and safety.
How can I remove stuck batteries from a device?
To remove stuck batteries from a device, try tapping the device gently to dislodge the batteries. If that doesn't work, use a small tool like a screwdriver to carefully pry the batteries out. Be cautious not to damage the device or the batteries.
