Farads
Capacitance is measured in Farads. "The unit... in ohm and meter" does not make sense.
. . is measured in farads or more usually microfarads or even picofarads. A capacitor has a capacitance of 1 farad when it has a voltage of 1 volt when there is 1 coulomb of charge on each plate. 1 coulomb is 1 amp flowing for 1 second.
How funny... Electrical Elastance measured in daraf's
The unit of power measured is watt, irrespective of resistance, capacitance or inductance of the circuit.
Capacitors are measured in Farads or microfarads.
Capacitance is a physical characteristic of a pair of conductors, dependent upon the distance between them, the opposing cross-sectional areas of those conductors, and the nature of the dielectric between them, and is measured in farads.Capacitive reactance is the opposition to the flow of current of a circuit, determined by that circuit's capacitance and the frequency of the a.c. supply applied to that circuit, and is measured in ohms.
Capacity in the sense of volume is measured in cubic metres, although litres (0.001m3) are common. Electrical capacitance is measured in farads.
Capacitor is the name of the device and capacitance is a measure of farads in the capacitor. Capacitance is the capacity for storing charge in the capacitor as measured in farads, micro farads or millifarads.
A capacitance vessel is a type of container used in various industrial applications to measure the level of liquids or solids based on capacitance principles. It typically consists of two conductive plates, with the material to be measured acting as the dielectric between them. As the level of the material changes, the capacitance between the plates fluctuates, allowing for precise level measurement. This technology is commonly used in tanks, silos, and other storage systems.
Capacitance in mosfet is of three types: gate capacitance diffusion capacitance routing capacitance Gate capacitance: limits the speed of the device t which it can be operated Diffusion capacitance: It is the capacitance due to charge carriers between drain and source. Routing capacitance: It is the capacitance of the metal which is deposited on the top of oxide layer.
Capacitors are built to different specifications depending on application. The higher the capacitance the more charge the capacitor can store.The capacity to store electric charge, when a voltage is applied. Measured in Farad = Coulomb/Volt. In other words, if for every volt applied the capacitor stores 1 coulomb of charge, it would have a capacitance of 1 farad. In practice this is a huge unit, and the capacitance is usually expressed in micro-, nano-, or even pico-Farad.
Resistance is a completely different quantity to capacitance, resistance being measured in ohms and capacitance in farads. So they are 'apples and oranges'. You should be asking, 'What happens if capacitive reactance (in ohms) is larger than resistance?'. And one answer would be that the phase angle will be greater than 45 degrees. There are other answers, too, but it depends what you want to know,