dark green and light green=front right speaker
tan and light blue=front left speaker
blue with orange stripe and blue with black stripe=back right speaker
black with brown stripe and yellow with blue stripe=back left speaker
+wire is orange and purple
-wire is yellow*
*there might be a few yellows just try each one you will get it right
Wire into the brown with red tracer at the ECU
In the SS VT Commodore, the speed sensor wire is typically colored yellow with a black stripe. This wire connects to the speed sensor located on the transmission. Always refer to the vehicle’s service manual for precise wiring information, as colors may vary by model or year.
You can find the 2005 Ford Ranger radio CD player wire color codes in most service manuals. The wire colors are associated as follows; the positive wire is red, the black wire is the ground, the green and yellow wires are speaker wires, and the white wire is the auxiliary wire.
Don't know about the Holden specifically, but in general, the starter will be held in place with two bolts. First, you'll want to disconnect the negative battery cable, then look at how the wiring is attached to the starter (which wire goes to which terminal). Then disconnect the wiring (should only be 2-3 wires). Then locate and remove the two bolts holding the starter in place. Installation is the reverse of removal.
how can i find out the colors of the speaker wire
It is brown.
The wire colors for a KW-AVX720 may vary depending on the manufacturer. It is best to refer to the user manual or contact the manufacturer for accurate information on wire colors for this specific model.
The standard light fixture wire colors are black, white, and green or bare copper. The black wire is the hot wire, the white wire is the neutral wire, and the green or bare copper wire is the ground wire.
Wire in series to 12v source
For the 1993 Toyota Tercel, the O2 sensor has three different wire colors. These colors are: black, blue, and white.
The red wire is the positive wire. The black wire is the ground wire. The green wire is the speaker wire. The white wire is the auxiliary wire.
The standard Romex wire colors used in electrical wiring are black, white, and bare copper.