answersLogoWhite

0

Using a remote control similar to those ones used to turn on electronic devices. The infrared rays can switch the light bulb on, since it has a small transistorised circuit that can actuate a tiny relay to put the light bulb in series with the electric circuit.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you make a light bulb light up using a 1.5 volt battery?

If it is a 1.5 volt bulb you can connect it through a series circuit directly to your battery. If the bulb is not made to run on 1.5 volts and needs another voltage, it may not light up!


How do you make a light bulb light up using a d cell battery?

no it will bloww


What can you connect to a battery and bulb for the bulb to light?

To light a bulb using a battery, you need to connect the battery terminals to the bulb's terminals using conductive wires. The positive terminal of the battery connects to one terminal of the bulb, while the negative terminal connects to the other terminal of the bulb. This creates a complete circuit, allowing electrical current to flow and illuminating the bulb. Make sure the bulb is compatible with the battery voltage to ensure proper functionality.


What is the conclusion for a battery powered light bulb?

what is a conclusion for a battery powered light bulb


How do you connect the parts of a simple electric circuit together so that the light bulb lights up?

Simply connect the -ve of the bulb to -ve of the battery and +ve of bulb to +ve of battery using an electrically conductive wire, the bulb will light automatically.


How do you light a bulb using only a battery?

Uhh... You need AT LEAST one wire other wise its impossible. You would need a custom shaped battery to do it without even one wire...


Can a car battery light up a 60 watt regular light bulb with out using a power inverter?

Yes it it is a 12 volt DC light bulb. It will not operate a household 120 volt light bulb.


How can I create a simple light bulb circuit using basic components?

To create a simple light bulb circuit, you will need a power source (such as a battery), a light bulb, and wires to connect them. Connect one end of the wire to the positive terminal of the battery, and the other end to one terminal of the light bulb. Then, connect another wire from the other terminal of the light bulb to the negative terminal of the battery. When the circuit is complete, the light bulb should light up. Make sure to use the correct voltage for the light bulb to avoid damaging it.


When using a 9 volt battery on a closed circuit with 2 light bulbs how many volts are used to light each bulb?

Each light bulb will receive the full 9 volts from the battery in a series circuit, so each bulb will be operating on 9 volts.


How do you light a light bulb without a light socket?

Take a lightbulb so the bottom touches on end of a battery. Take a wire and touch the battery and the other end to the lightbulb.


Why does a battery power a light bulb?

A battery powers a light bulb by converting stored chemical energy into electrical energy. When the battery is connected to the light bulb, a circuit is completed, allowing the flow of electrons through the filament of the bulb, which produces light and heat.


Will the light bulb light up if you connect a wire to it?

No, a light bulb needs a closed circuit with a power source, such as a battery or electrical outlet, in order to light up. Simply connecting a wire to a light bulb without a power source will not allow it to light up.