Unless you are skilled in electrical engineering and understand the nuances of RF tuner design, you can't. A easier solution is to get an old VCR and use that as a tuner/RF modulator.
Sure! "The remote control was missing, so I had to get up to change the channel on the TV."
if your using a remote try changing the batteries
Use the remote
Use the TV remote and hit 03. Do not use the satellite remote only the TV remote.
== ==
TV channel preview channel
It saves you having to walk to the television by clicking a button on the remote to change the channel or volume.
a tv remote used to change channels
I have a TV converter box, I use the remote to scan for available signals and then they are automatically programmed into my remote/system as an available viewing channel.
What kind of " Remote Control " are you talking about. If you're talking about the TV remote, it can benefit you in a wide variety of ways. Eg: You can change the channel with a touch of a button, you can go to selected channels using the number pad, you can use special settings which should be labled on your remote ect..
There is no way to change the input without a remote :(.
To run a channel auto scan on an Insignia TV without a remote, you can use the physical buttons on the TV itself. Locate the "Menu" or "Settings" button, typically found on the side or bottom of the TV. Press this button, navigate to the "Channel" or "Setup" option using the volume or channel buttons, and then select "Auto Scan" or "Auto Program" to start the scan. If your model has a power button, you might need to hold it down for a few seconds to access the menu.