You could put a know resistive load on the battery and then monitor the voltage across the load until the battery was at zero volts. Using Ohm's Law you can calculate the current at any time. Current = Voltage / Resistance. You can multiply the average current times the number of hours for the battery to go to zero.
For the backup time for 4 fans. First we required battery AH (battery amper) and battery volts & and and ups ratings. then we calculate back time .
You really can't calculate that, it's determined at manufacture. It'll be stated on the battery casing. Look for something saying Ah, Ampere hours.
There is a fairly simple method that can be used to calculate battery life, but you would have to know the power consumption of the device your 4100 Ah battery is powering up. If you hit the web and check out the DigiKey Battery Life Calculator, you can enter the requisite information and get a good idea of the battery life/run time.
Yes, it mAh or Ah is how long the battery lasts, it does not affect performance.
The amperage of a 12V battery depends on its capacity, which is measured in ampere-hours (Ah). To calculate the amperage, you would divide the capacity (Ah) by the voltage (V). For example, a 12V battery with a capacity of 100Ah would have an amperage of 8.33A (100Ah / 12V).
Yes
No, it does not have enough capacity (i.e. ah rating).
V is the batteries rated voltage. Ah is the amp-hour of the battery. This is a rating of how many amps it can supply for a given period of time. For example a 600 Ah battery with a 100 A load means that the battery should last 6 hours.
Yes. In about two to two and a half hours, depending on the condition of the battery.
12 Volt 70 AH battery
To calculate the total watt-hours of a battery bank, multiply the ampere-hours (Ah) by the voltage (V) of the batteries. So, for a 200 Ah 12V battery, the total watt-hour capacity would be 200 Ah * 12 V = 2400 watt-hours.
Yes as long as they are both 12 volt batteries.