0
What else can I help you with?
Is there a home audio system for SurroundSound that doesn't require ugly speakers and wire being strung all over the room?
You can buy wireless speakers.That means that they communicate with your stereo like a cordless phone. You can also buy the same type of device to convert your current speakers to wireless. You have to have a power outlet near the speaker and then you connect the device to each speaker and another component to the stereo.
What kind of receiver will allow you to play a mono hi-fi speaker from the 1950's when present receivers are formatted for stereo?
Any stereo amplifier these days can connect to a speaker from the 1950's. You will just have to connect one side, left or right, to the speaker. You won't get stereo. If your receiver has the option, you should select mono output to combine the signal of both channels. Never connect the left and right speaker leads together to one speaker.
Can you connect speaker wires that were previously cut in half together without effecting sound quality?
it can effect the quality of the speakers :) :)
How do you connect microphone with speaker?
you plug them in
How can I safely connect an 8 ohm amplifier head to a 16 ohm speaker cabinet?
To safely connect an 8 ohm amplifier head to a 16 ohm speaker cabinet, you can use a series connection method. Connect the positive terminal of the amplifier to the positive terminal of the speaker, and then connect the negative terminal of the speaker to the negative terminal of the amplifier. This will create a total impedance of 24 ohms, which is safe for both the amplifier and the speaker.
What is speaker cable used for?
Speaker cable is used to connect the speaker outputs on audio devices such as a receiver or amplifier to the inputs on the speaker(s).
Can we connect iPod Shuffle to a speaker?
Yes, you can connect an iPod Shuffle to a speaker, but the method depends on the speaker's capabilities. If the speaker has a 3.5mm audio input jack, you can use a standard audio cable to connect the iPod Shuffle directly. Alternatively, if the speaker is Bluetooth-enabled, you can use a Bluetooth transmitter that connects to the Shuffle's headphone jack to stream audio wirelessly.
How can I connect a microphone to a speaker for optimal sound quality?
To connect a microphone to a speaker for optimal sound quality, use a balanced XLR cable to connect the microphone to a mixer or audio interface. Adjust the input levels on the mixer/interface to avoid distortion. Then, connect the mixer/interface to the speaker using balanced cables. Ensure the speaker is placed properly for optimal sound projection.
What does speaker A minimum 4 ohms speaker impedance means?
The speaker you connect to those terminals needs to be 4 ohms or greater.
How do you connect a Cambridge sounworks bass speaker?
To connect a Cambridge SoundWorks bass speaker, first ensure that your audio source (like a receiver or amplifier) is powered off. Use an RCA cable to connect the subwoofer output from your audio source to the subwoofer's input. If the subwoofer has speaker wire terminals, connect the speaker wires from your main speakers to the subwoofer's output, then connect the subwoofer to the power source. Finally, power on your audio equipment and adjust the settings as needed.
How do you get an onkyo speaker to work for a Playstation?
Connect them to the TV
How can I connect a microphone to a speaker?
To connect a microphone to a speaker, you will need an audio cable with the appropriate connectors. Plug one end of the cable into the microphone and the other end into the input on the speaker. Adjust the volume levels on both the microphone and the speaker to ensure clear sound output.
