I would use relays, connected to the original wires, also connected to your wireless setup
I recommend using yahoo answer
alluminuim
you can buy pcb boards from places like maplin, they will have evrything you need to make a switch board.
Flip it; or if a knob switch, turn it; or if a remote, press 'lights on'
To make a remote-controlled electromagnet, you would need a remote control system, an electromagnet, and a power source. You can connect the power source to the electromagnet through a relay controlled by the remote system, allowing you to turn the electromagnet on and off wirelessly. This setup would enable you to control the magnetic force remotely.
Remote controlled: buy a cheap RC car and steal RC circuit from it: use circuit output to close a relay controlling the drill motor. More power: if the drill has a torque switch, set it to the most torque (slowest speed for pull of the trigger). If not, add external gearing to accomplish this. Great site for tinkering: mcmaster.com
itz impossible
To operate a ceiling fan using a remote switch, first make sure the fan is turned on. Use the remote control to adjust the fan speed and direction. Press the buttons on the remote to turn the fan on or off, change the speed, and switch the direction of the fan blades. Make sure the remote has fresh batteries and is within range of the fan for proper operation.
To operate a remote controlled ceiling light, first ensure the light is installed correctly and the remote has fresh batteries. Use the remote to turn the light on/off, adjust brightness, and change settings as needed. Make sure the remote is within range of the light for it to work properly.
u dip ur head down the toilet and say "i want a remote controlled plane " and it works...
Why make it remote controlled when there are lawnmowers out there that can mow all by themself? You can see info on them at www.lawnbotts.com
# Make sure there is power to the fan, meaning the circuit is hot. # Make sure it is turned on! # Make sure the batteries in the remote are good.