The steps below can assist you in programming the remote to your Magnavox TV or any other TV with our DISH remotes.
Addressing Remote to TV:
1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.
How do I program my Magnavox universal remote to work with my tv
To get your universal remote to work for your Magnavox device you need the correct code for it. This code can be find in your remotes code booklet.
`i want to program my lg remote(CIRCA 2008) TO MY OLD MAGNAVOX dvd PLAYER?
You will need to get a list of compatible numbers for a GE universal remote to work with a Magnavox converter box. You can call the GE remote company and request a list.
Not all universal remote work with digital converter boxes, there is one that does work with Magnavox converter boxes, the RCA RCR503.
ge
Need to know if it is possible to program a charter remote to Magnavox sdtv converter box
Here are some codes I found online but none seem to work for my remote. Codes for Magnavox TV when using RCA Universal Remote: 006,007,010,011,013,016,027,033,035,043,066,087,089
Here is a list of the codes for the magnavox 021, 022, 062, 063, 104, 108, 124
Found a solution that works well... I picked up a Sony RM-VL600 universal remote with learning capability. With this unit, I've been able to program all the functions of the TB100MW9 DTV Converter box. I picked up this unit at Walmart for $25, but have seen it on Amazon for as little as $16. This remote is a vast improvement over the remote that comes with the Magnavox DTV converter, and was easy to program. Found another solution.... after tinkering with the Philips universal remote for an hour, i finally found a code that can control the magnavox converter. the code is 0759. the Philips remote i have is SRU3006/27 but it might work for any Philips universal remote. the remote itself cost me about 15 dollars. if you call Philips or magnavox they would say none of the remotes can operate the converter.they obviously didn't know their own product...
that's what the INSTUCTIONS are for
Following are some of the top brands to universal remote controls which can work for both TV and Bose equipments. Universal Remote Control for RCA, GE, Sony, Magnavox, Phillips, Zenith, and most major brands ,One For All DirecTV RC64RBK Universal Remote Control with Wireless Antenna ,Philips 6-Component Universal Learning Remote Control and Logitech Harmony One 915000035 Universal Remote
i have a rca remote without any light, have a quasar tv, how do i make this work?
what universal remote will work on auria tv model eq3299
In programming a ds converter using an RCA universal remote, it is necessary to find the code for the remote. This can be done by turning devices on and pressing search. It will rotate through and stop when the successful setting has been reached. Switch to each additional device that needs to be connected on the remote and perform the same function. This will program all devices to work off the universal remote.
If it's an universal remote then probably yes.
You should not have to program this remote.... although it says universal on it. This is an original remote and should work when you put the batteries in. For T.V viewing, just push the t.v button on the top of the remote then power/on-off .... wait for the light, then the sound, then begin with your normal activities.