0
To program a Philco converter box using a universal remote while the box is off, first, ensure the universal remote is compatible with the converter box. Press and hold the "TV" or "Device" button on the remote until it lights up, then release it. Enter the code for the Philco converter box, which can usually be found in the remote's manual or online. Once the correct code is entered, the indicator light will turn off, and you can test the remote by turning the converter box on and checking if it responds to the remote commands.
What else can I help you with?
What is the 4 digit universal remote code for a philco digital converter?
The universal remote code for a Philco digital converter can vary depending on the remote brand. Common codes include 1004, 1015, and 1020, but it's best to consult the user manual of your specific universal remote for the correct code. If those do not work, try using the code-search feature on your remote to find the correct one.
Is there a code for RCA remote and Craig converter?
how to program a universal rca remote to a dtv craig converter box
How do you program a ge universal remote to apex digital converter?
To program your remote you have to search for the local channels in your area.
Is there a code for GE remote and Craig converter box?
how to program a universal rca remote to a dtv craig converter box
How do you program a GE universal remote to a GE converter box?
You can program your GE universal remote, to your converter box, by holding the power button in until the auxiliary read lights aluminate red. Select auxiliary and input the proper code.
What is the universal remote code for a Philco TB100HH9 digital converter box?
Found a solution that works well... I picked up a Sony RM-VL600 universal remote with learning capability. With this unit, I've been able to program all the functions of the TB100MW9 DTV Converter box. I picked up this unit at Walmart for $25, but have seen it on Amazon for as little as $16. This remote is a vast improvement over the remote that comes with the Magnavox DTV converter, and was easy to program. Found another solution.... after tinkering with the Philips universal remote for an hour, i finally found a code that can control the magnavox converter. the code is 0759. the Philips remote i have is SRU3006/27 but it might work for any Philips universal remote. the remote itself cost me about 15 dollars. if you call Philips or magnavox they would say none of the remotes can operate the converter.they obviously didn't know their own product...
How do you program a ds converter using a rca universal remote?
In programming a ds converter using an RCA universal remote, it is necessary to find the code for the remote. This can be done by turning devices on and pressing search. It will rotate through and stop when the successful setting has been reached. Switch to each additional device that needs to be connected on the remote and perform the same function. This will program all devices to work off the universal remote.
Need code for RCA universal remote for artec converter box?
need code for rca universal remote model rcu300t for artec converter box
What is the universal remote code for homeworx converter box?
I have the same remote that's breaking and I can't find a universal remote either.
RCA universal codes for digital stream conv box?
Digital Stream converter box remote code: Philips Universal Remote works on '1776'
What is the universal remote program code for dolby digital converter?
It would depend on the brand of remote that is being used. Just look at the instructions that come with the remote to find out how to properly set it up.
Will a direct TV remote work with a KCPI converter box?
A DirecTV remote may work with a KCPI converter box if the converter box is compatible with universal remotes and can recognize the programming codes from the DirecTV remote. You will need to program the remote to the converter box, which usually involves entering a specific code or following a pairing process. Check the user manuals for both devices for compatibility and instructions. If the KCPI box supports universal remote control, it should work; otherwise, you may need to use the original remote that came with the converter box.
