0
What else can I help you with?
Can i use a universal remote on a silo tv?
Yes, you can use a universal remote with a Silo TV, provided that the remote is compatible with the brand. You will need to program the universal remote to recognize the Silo TV by entering the correct code or following the programming instructions specific to the remote. Check the remote's manual for the list of codes and setup procedures.
Why can't a tv remote be used to operate a DVD player?
Remote controls are designed to operate with specific devices. Normally, a television remote control will not have the buttons to operate a DVD player. However, some manufacturers have television remote controls with DVD controls built in and a player from the same manufacturer can be controlled by the same remote. In addition, there are several third party remote controls that can be programmed to operate a wide variety of devices allowing one control to operate several different pieces of equipment.
My Silo tv will not connect to cable, what do I do?
If your Silo TV is not connecting to cable, try the following steps: Check the cable connection: Ensure that the cable is securely plugged into both the TV and the cable outlet. Restart the TV: Turn off the TV, unplug it from the power source, wait for a few minutes, then plug it back in and turn it on again. Sometimes, a simple restart can resolve connectivity issues. Check cable signal: Make sure there are no issues with the cable signal by testing it with another TV or contacting your cable provider. Rescan for channels: In the TV menu settings, find the option to rescan for channels. This can help the TV detect and connect to available cable channels. Update firmware: Check if there are any available firmware updates for your Silo TV and install them if necessary. Updated firmware can often fix compatibility issues and improve performance. If none of these steps work, you may need to contact Silo customer support for further assistance or consider consulting a professional technician.
What was television like in the sixties?
no remote control no cable
How do i program charter cable remote to work rca tv?
how do i program a charter remote to a rca tv
What are the codes for programming a silo tv on a dish network remote control?
We don't have remote codes for the Silo TV so I have provided the instructions for performing a power scan to program the remote to your TV.Remote: Basic Remote (Television Only) Turn the Television On.Press and hold the TV Power button for three seconds until the LED flashes.Press and release the Red TV Power button.Press and release the Up or Down Arrow on the remote once every second until the television turns off.After the television turns off, press and release the # button.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
You bought a lcd tv and it has no remote or manuel what can you do?
If it has a remote function and you just don't have the remote, buy a universal remote. Most will fine the code to operate properly.
How do you program your tablet to operate your TV as your remote control?
sync to icloud
How do you program your iHip universal tv remote?
there is no cable button on this remote what do i push to hook cable its says hit cable button
Can you use a old remote for another tv?
Yes, you can use old remote to the another tv, If the battery in the remote is new. And if the tv is same cable as you use before.
What is the Buckeye Cable remote code for a Sony Bravia tv?
0810
Does an lcd tv remote control the cable?
Most cable providers will also provide a remote that can be programmed to work with the type of tv that you own. I have never seen or used a remote that is specifically for a tv so I would say that they do not work, but your best bet would be to get info from your tv manufacturers.
