Basically you need to push the power button followed bt the device you are operating ie tv then input the first code then the leds should blink twice then push power button again if tv turns on or off depending which the set was on when you started (it should do the opposite if on at the start should turn off etc ) if it does push the ok or memory button that locks in that code if the correct one at first go should operate the set in every way if it doesnt then start again and move on to the next code you may find along the way the codes will turn it on and off but not all functions its basically hit and miss sometimes its the last code that works lifes like that sometimes if no joy with any contact the manufacturers and ask for the search code this runs through all possible codes and finds the exact one hope this helps
Yes, you can use a universal remote with a Silo TV, provided that the remote is compatible with the brand. You will need to program the universal remote to recognize the Silo TV by entering the correct code or following the programming instructions specific to the remote. Check the remote's manual for the list of codes and setup procedures.
To program the remote with the codes, firstly, turn on the electronic gadget for which you are going to use this remote, by pressing the On and Off button. Then locate the Setup or the Code Search key on the remote control. These buttons may vary from remote to remote. Just hold on the setup or the code search key for 5 - 10 seconds or till the light on the remote
what are the codes for a sanyo universal remote
From the company that built your universal remote. Check their website.
hold the setup button for a second, then click the button labeled menu. If you hold the setup button too long the light will stay on and expect a code for reprogramming, so don't do that.
Yes, you can program a TV to a universal remote even if the TV itself has no visible power button. You can typically do this by using the remote's setup function and entering the specific code for your TV brand. If you don’t have the code, many universal remotes offer a code search feature that cycles through potential codes until it finds one that works. Additionally, some TVs can be programmed via the remote’s learning function if it supports it.
To enter codes on the Quasar Tower Universal Remote LSSQO209, first press and hold the "Setup" button until the indicator light comes on. Then, enter the code for your device using the number buttons on the remote. After entering the code, press the "Power" button to test if the code works.
If it's an universal remote then probably yes.
I have the same remote that's breaking and I can't find a universal remote either.
What are the codes for a panasonic tv phillips universal remote c1035a
What is universal remote control code for air-con?
The universal remote code differs for each individual television.