The belt usually has a clip or ring that is on the left side (as it's worn) of the belt buckle. Before putting the belt on, put the length of the belt through that clip, then put the belt on. The small nub you'll find on the right side (as it's worn) of the belt buckle will go into a free hole to keep the belt buckle in place. If you have a detachable belt buckle such as a western belt, then the belt and the buckle are sold separately. If that is the case, then the belt will have a snap that will open the end. The buckle has a metal ring on the inside that the end of the belt will go through.
The parts of a belt buckle are the prong, buckle and belt.
The buckle.
The girl's belt buckle was glistening in the light.
Use the seat belt and buckle up.
He had a black belt with a gold / brass buckle
With some belts there are clips in the reverse side, which you can use to change the buckle. What do you do if the belt you want doesn't have clips? Well I cut the stitiching or remove the rivets, depending on which the belt has, then replace the buckle and refasten it with safety pins, or if you have a thinner belt you may prefer to staple it. Hope this helps.
For men, the buckle is on the left.
The belt and the buckle.
belt loop. I've always referred to that part as the belt's tongue.
Seat belts are made with an authentic metal seat belt buckle. The belt can fit just about every size while the buckle keeps the passenger locked in.
the wwe champion chip. because i scrowed it off and put a nother belt buckle on
To reverse a seat belt buckle, first ensure that the buckle is not engaged. Locate the release button on the buckle, press it, and gently pull the belt out to its full length. Then, feed the belt back through the buckle in the opposite direction, ensuring it clicks securely into place. Finally, test the buckle to confirm it functions correctly in its reversed position.