It depends on the load.
yes, the 5ah battery will last 5/3 longer than the 3ah battery.
There is not enough information. It depends on the type of battery: chemistry, cells, size.
The wattage of a 18650 battery can be calculated using the formula: Watts = Volts × Amperes (Ah). A standard 18650 battery has a nominal voltage of 3.7 volts, and its capacity typically ranges from 1800mAh to 3500mAh. For example, a 3000mAh (or 3Ah) battery would provide approximately 11.1 watts (3.7V × 3Ah = 11.1W). Therefore, the wattage varies depending on the specific capacity of the battery.
Yes you can. The charger has what is called a trickle charge and will need to be left charging at least overnight and maybe for two nights dependant on how little charge the battery has left.
54 Lombard StreetLondonEC3P 3AH
LDA is an Intel 8085 opcode, 3AH, that loads that accumulator from a location specified in memory.
The location for Baylis Court School is in Gloucester Avenue SloughSL1 3AH.
To develop a program using the ADI instruction to add the hexadecimal numbers 3AH and 48H and store the result in memory location 2100H, you would first load the accumulator with the first hexadecimal number 3AH using the MVI instruction. Then, you would use the ADI instruction to add the second hexadecimal number 48H to the accumulator. Finally, you would store the result from the accumulator into memory location 2100H using the STA instruction.
1/3Ah That is to say, 1/3 times the area of the base times the height (not the slant height) of the cylinder
v=1/3Ah (ex.1/3*6*8=??) 6 is equal to the variable A 8 is equal to the variable h
In the 8085, the LDA instruction loads the accumulator from memory, while the STA instructionstores the accumulator to memory. LDA is a read, while STA is a write. LDA is opcode 3AH, while STA is opcode 32H.
In the 8085, the LDA instruction loads the accumulator from memory, while the STA instruction stores the accumulator to memory. LDA is a read, while STA is a write. LDA is opcode 3AH, while STA is opcode 32H.