0
That will depend on the sum of the load resistance and the internal resistance of the battery (this is true for all power sources, not just 6 volt batteries).
Small compact batteries tend to have higher internal resistance and therefore are more limited in the current they can deliver to a given load than larger batteries.
What else can I help you with?
How many volts will a new 12 vot car battery put out?
A fully charged 12 volt battery will output 12.6 volts are read with a digital volt meter.
Five 1.5 volt batteries?
They make a 7.5 volt battery when put together
How do you measure the level of charge in a battery?
you put a volt meter on it
Can you charge a 12 volt ATV battery with a regular charger and if so what to put it on?
Yes, you can use a twelve volt car battery charger. Be sure to set it on low.
Can 9 volt battery kill?
No. Unless you put it in a sock and hit someone with it.
What happens if you put the wrong size battery in a 2003 pt cruiser?
Nothing as long as it was a 12 volt battery.
Why does steel wool burn?
if you put steel wool at the tip of a 9 volt battery
What is the largest recommended cold cranking amp you can put in a 97 Blazer?
As long as it is a 12 volt battery that fits, you can put as large of a CCA battery as you want to buy.
What will happen if you put your tongue on a small 9 volt battery?
when you lick a 9 voltage battery you get a tiny shock on your toung and it hurts.
How are the 12-volt batteries connected to provide the required 24-volt electrical power for the FRS generator?
If you put two 12 V batteries in series you get 24 V. Connect the positive of battery 1 to the negative of battery 2. Then you have 24 V between negative of battery 1 and positive of battery 2.
Why would my 2004 ford escape battery light stay on after changing the battery?
Have the output of your alternator checked,it should put out 14.5 volt. Also check the battery connection to virify that they are clean.
How do you hook up a battery charger to charge a 24 volt system?
Most 24 volt systems use 2 or 4 12 volt batteries. Be careful not to let the cables get mixed up. They need to be put back in the same spot. Disconnect the battery, Charge each battery individually, Reconnect the cables exactly like they were before. You are ready for work.
